Home |
Search |
Today's Posts |
#4
![]() |
|||
|
|||
![]()
I used my Icom IC-2100H for about a year full time as a
stand-alone-digi and it worked great. I had no problems. I've looked into the IC-2100H in the past for use as a regular 2m mobile and didn't like what I had read Fine rig, just don't use a non-resonant antenna (i.e., high VSWR) as the finals module could fail (like any rig!). I'm running a RatShak HTX-252 for APRS...it was free, albeit dead; took a few minutes to repair the problem (speaker wire pinched between the frame and board toasted a resistor in the audio circuit...so much for Chinese QC). If you get one, do the squelch mod, it works much better. A stock -252 works poorly. The -242 or the -212 are better selections and rather cheap. Want solid? Look for the Icom non-PL units, the Kenwood non-PL units...both rock solid (don't drop one on your foot, either) and cheap. Either unit will last a long time. A |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Good 144/440 mobile antenna recommendations | Antenna | |||
APS 13 DX Antenna with a good 70s tuner | Antenna | |||
Poor quality low + High TV channels? How much dB in Preamp? | Antenna | |||
Mobile Antennas | Antenna | |||
Mobile Antenna Question | Antenna |