In article ,
says...

Hello
My radio club is looking for software that would allow a 900mhz
maxtrac to be moved into the ham band.
any help would be great.

This opens up a big can of worms. Take it from one who has done a
few hamateur/900 Maxtrac conversions.

First and foremost: Programming is only part of the effort. You
can use the well-known 'shift-key' trick, with the stock Maxtrac RSS, to
enter the frequencies for 900MHz amateur systems. HOWEVER -- just
because the radio takes them does not necessarily mean it will work
without modification there.

One thing you need to be concerned with are modifications to the
VCO to even get the thing to cover amateur frequencies. Next, you need
to replace some filters in the receiver section so the front end won't
be deaf as the proverbial post at amateur frequencies.

Info on the (extensive) modifications required may be found at
these links:

http://www.batlabs.com/maxrad.html (scroll about 1/4 of the way
down, look for '900MHz Amateur Radio Conversion')

http://www.batlabs.com/max900a.html (Details the full-blown full-
coverage conversion. Not for the weak of heart or electronically
unskilled).

Happy hunting.


--
Dr. Anton T. Squeegee, Director, Dutch Surrealist Plumbing Institute.
(Known to some as Bruce Lane, ARS KC7GR,
kyrrin (a/t) bluefeathertech[d=o=t]calm -- www.bluefeathertech.com
"If Salvador Dali had owned a computer, would it have been equipped
with surreal ports?"