Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
Need help with FM-2033 mobile 2m rig
I have a KDK FM-2033 mobile rig that I just got. I need to know how to set
the PL tone. Upon opening the case I can see the tone board. There is a pot next to it labeled "tone" as well as a pot on the underside of the tone board itself. Which pot do I use? How do I tell what the current frequency _is?_ I hope someone can help me... -Greg Courville |
#2
|
|||
|
|||
Greg,
I owned an FM-2036 (I think?). That would be from the early 1990's, right? Almost always, the PL tone frequency is set by a switch (not an adjustable control). The one you are looking at might be a setting for how loud it transmits the tone, not what frequency it's at. Look for a set of dipswitches, probably a 4-position one, might be 6- or 8-position. All the best, and 73, Dave KZ1O Greg Courville wrote: I have a KDK FM-2033 mobile rig that I just got. I need to know how to set the PL tone. Upon opening the case I can see the tone board. There is a pot next to it labeled "tone" as well as a pot on the underside of the tone board itself. Which pot do I use? How do I tell what the current frequency _is?_ I hope someone can help me... -Greg Courville -- This file is PureMail protected. To reply to the sender, you MUST include this in the subject line: M321I58DNU 09/06/2003 (without that string in the subject, your message will be deleted, unread) |
#3
|
|||
|
|||
Greg,
I owned an FM-2036 (I think?). That would be from the early 1990's, right? Almost always, the PL tone frequency is set by a switch (not an adjustable control). The one you are looking at might be a setting for how loud it transmits the tone, not what frequency it's at. Look for a set of dipswitches, probably a 4-position one, might be 6- or 8-position. All the best, and 73, Dave KZ1O Greg Courville wrote: I have a KDK FM-2033 mobile rig that I just got. I need to know how to set the PL tone. Upon opening the case I can see the tone board. There is a pot next to it labeled "tone" as well as a pot on the underside of the tone board itself. Which pot do I use? How do I tell what the current frequency _is?_ I hope someone can help me... -Greg Courville -- This file is PureMail protected. To reply to the sender, you MUST include this in the subject line: M321I58DNU 09/06/2003 (without that string in the subject, your message will be deleted, unread) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Good 144/440 mobile antenna recommendations | Antenna | |||
Hustler mobile antenna | Antenna | |||
mobile antenna impedance comparison | Antenna | |||
Mobile Antennas | Antenna | |||
TransCon 10 transconverter mobile rig | Boatanchors |