Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 1st 06, 10:14 PM posted to aus.radio.amateur.misc,aus.radio.cb,aus.radio.scanner,rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Dec 2006
Posts: 2
Default Any Motorola techs in here?

"Jesco White" wrote in message
newsan.2006.12.01.01.30.53.23141@jesco...
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
newsan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@
430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling
power
supply. I'm not game to up the drive any further until I know the
specs!

Basically any specs or any info at all would be great, thanks in
advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band
to
talk into the 5 w output repeaters, if that's the case, and I do hope
I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.


You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.


LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.


May have something to do with the fact that you posted into a CB
newsgroup????????????






  #2   Report Post  
Old December 4th 06, 01:50 AM posted to aus.radio.amateur.misc,aus.radio.cb,aus.radio.scanner,rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Nov 2006
Posts: 10
Default Any Motorola techs in here?

On Sat, 02 Dec 2006 09:14:45 +1100, Marty saiyd:

"Jesco White" wrote in message
newsan.2006.12.01.01.30.53.23141@jesco...
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
newsan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@
430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling
power
supply. I'm not game to up the drive any further until I know the
specs!

Basically any specs or any info at all would be great, thanks in
advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook Band
to
talk into the 5 w output repeaters, if that's the case, and I do hope
I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police repeaters-
ya idiot. There's more to the UHF band than CB radio you know.


You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.


LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.


May have something to do with the fact that you posted into a CB
newsgroup????????????


You might want to learn more about interpreting Usenet headers before
trying and failing to flame in a successful manner. Good luck with
that.

  #3   Report Post  
Old December 4th 06, 11:48 PM posted to aus.radio.amateur.misc,aus.radio.cb,aus.radio.scanner,rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Dec 2006
Posts: 2
Default Any Motorola techs in here?

"Jesco White" wrote in message
newsan.2006.12.04.01.50.29.811140@jesco...
On Sat, 02 Dec 2006 09:14:45 +1100, Marty saiyd:

"Jesco White" wrote in message
newsan.2006.12.01.01.30.53.23141@jesco...
On Fri, 01 Dec 2006 11:16:13 +1000, atec 77 saiyd:

Akmed wrote:
Jesco White wrote:
On Fri, 01 Dec 2006 10:32:20 +1000, Warren saiyd:

"Jesco White" wrote in message
newsan.2006.11.30.23.48.34.843665@jesco...
G'day,

Looking for specs on this amplifier:

http://img100.imageshack.us/my.php?image=pa2modhi7.jpg
http://img484.imageshack.us/my.php?image=pa1modzp8.jpg

Don't know much at this stage, apart from 4Watts drive (@
430-480MHz)=
approx. 150W output, draws well over 30A from my poor struggling
power
supply. I'm not game to up the drive any further until I know the
specs!

Basically any specs or any info at all would be great, thanks in
advance.

Cheers,
Let's take a wild guess here, you want to use it on the UHf Chook
Band
to
talk into the 5 w output repeaters, if that's the case, and I do
hope
I'm
wrong, you'd be better off with a decent antenna system,
WRONG, I plan to cause havoc on the remaining analog police
repeaters-
ya idiot. There's more to the UHF band than CB radio you know.


You better be CAREFUL as I will dob you into Simone Templar.

I bet that has him wetting himself and quaking in his uggies.

LOL, quite.

Amazing isn't it - cannot discuss power amplifiers in these
Aussie groups without the usual knee-jerk assumptions, irrespective of
being perfectly within the law to own and use in an appropriate manner.
Apparently no Hams here use amplifiers I guess.


May have something to do with the fact that you posted into a CB
newsgroup????????????


You might want to learn more about interpreting Usenet headers before
trying and failing to flame in a successful manner. Good luck with
that.


From: Jesco White
Organization: Boone County Coonhound Society
Subject: Any Motorola techs in here?
Date: Mon, 04 Dec 2006 12:50:31 +1100
Message-ID: pan.2006.12.04.01.50.29.811140@jesco
Newsgroups:
aus.radio.amateur.misc,aus.radio.cb,aus.radio.scan ner,rec.radio.amateur.equipment


Hmm...

You see, I bet, and this is just a guess mind you, that the part of the
headers that solicited a comment was:

"Newsgroups:
aus.radio.amateur.misc,aus.radio.cb,aus.radio.scan ner,rec.radio.amateur.equipment"

And in particular:

"aus.radio.cb"

Seeing as most people posting in this group about high powered UHF gear are
actually referring to high powered UHF CB equipment.....

The fact that you posted no indication that you were seeking info for
Amateur operation but did refer to the frequency range being up to 480MHz,
again within the scope of UHF CB, probably only strengthened that fear...

But that's just my opinion, after all I'm still learning to read Usenet
headers...........................................



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
a page of motorola 2way 2 way portable and mobile radio history john private smith Policy 0 December 22nd 03 02:42 AM
FS- 2way Service/Maint/Operator Manuals !!!! David M Schertzer Boatanchors 0 November 1st 03 05:31 PM
FS- 2way Service/Maint/Operator Manuals !!!! David M Schertzer Boatanchors 0 October 24th 03 03:12 PM
FS- 2way Service/Maint/Operator Manuals !!!! David M Schertzer Boatanchors 0 October 24th 03 03:12 PM
FS- 2way Service/Maint/Operator Manuals !!!! David M Schertzer Boatanchors 0 October 12th 03 08:53 PM


All times are GMT +1. The time now is 10:23 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017