Home |
Search |
Today's Posts |
#3
![]() |
|||
|
|||
![]()
In article ,
"Ed G." wrote: Anybody know what connector I need to connect RG-316 to the PL-259 or go direct to the rigs SO-239? Any help will be appreciated by me and another ham. We are using the RG-316 for mobile installation because it's easy to snake thru small spaces. Its also awful small diameter. I can't help but wonder what the losses are for that.... gotta be worse than RG58, maybe? If snaking coax in tight spaces is your concern, I'd at least look at the Motorola white Teflon cable used a lot currently for commercial mobile installations. It has the physical attributes of the RG316, but is a little bit bigger, thus a bit lower loss. I don't recall the generic type number, but a Google search should turn up something under Motorola White Teflon coax. Connectors are more readily available for this than what you have. Ed One hundred watts is the most power I'll be running. I will check out the other Motorola cable you mention, thanks. 73 Dale, K9VUJ -- |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Need help identifying an antenna connector | Antenna | |||
Looking for a bnc male with base - any such animal? (correction - female connector) | Antenna | |||
WTB: Microwave Modules Connector | Equipment | |||
Need pinout for KDK mic connector | Equipment | |||
Need pinout for KDK mic connector | Equipment |