Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
Why not wire in a bank of PowerPoles instead. Much neater and smaller
installation. I use PowerPoles on everything now. Dick - W6CCD On Wed, 1 Oct 2003 00:09:36 -0400, "Ryan, KC8PMX" wrote: My next truck, I am going to wire quite a few of them in there, with adequate wiring, at least for the stuff requiring 15amps or less, with the source for those sockets coming from the battery direct. |
#2
![]() |
|||
|
|||
![]()
Why not wire in a bank of PowerPoles instead. Much neater and smaller
installation. I use PowerPoles on everything now. Dick - W6CCD Because my car has an accessory port and I am not about to go "hamifying" my car, short of a dualband antenna and a radio with a remote mount head. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com |
#4
![]() |
|||
|
|||
![]()
I was responding to Andy KC2SSB who said, and I quote, "My next truck,
I am going to wire quite a few of them in there, with adequate wiring, at least for the stuff requiring 15amps or less, with the source for those sockets coming from the battery direct." You weren't replying to ME (KC2SSB), you were replying to someone else. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com |
#5
![]() |
|||
|
|||
![]()
On 02 Oct 2003 13:50:28 GMT, pamme (VHFRadioBuff)
wrote: I was responding to Andy KC2SSB who said, and I quote, "My next truck, I am going to wire quite a few of them in there, with adequate wiring, at least for the stuff requiring 15amps or less, with the source for those sockets coming from the battery direct." You weren't replying to ME (KC2SSB), you were replying to someone else. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com You are right. It was Ryan KC8PMX that I was responding to. My point was that I was NOT responding to your question. Just a little mix up in names. Sorry. Dick |
#6
![]() |
|||
|
|||
![]()
On 02 Oct 2003 13:50:28 GMT, pamme (VHFRadioBuff)
wrote: I was responding to Andy KC2SSB who said, and I quote, "My next truck, I am going to wire quite a few of them in there, with adequate wiring, at least for the stuff requiring 15amps or less, with the source for those sockets coming from the battery direct." You weren't replying to ME (KC2SSB), you were replying to someone else. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com You are right. It was Ryan KC8PMX that I was responding to. My point was that I was NOT responding to your question. Just a little mix up in names. Sorry. Dick |
#7
![]() |
|||
|
|||
![]()
I was responding to Andy KC2SSB who said, and I quote, "My next truck,
I am going to wire quite a few of them in there, with adequate wiring, at least for the stuff requiring 15amps or less, with the source for those sockets coming from the battery direct." You weren't replying to ME (KC2SSB), you were replying to someone else. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com |
#8
![]() |
|||
|
|||
![]()
On 02 Oct 2003 12:39:14 GMT, pamme (VHFRadioBuff)
wrote: Why not wire in a bank of PowerPoles instead. Much neater and smaller installation. I use PowerPoles on everything now. Dick - W6CCD Because my car has an accessory port and I am not about to go "hamifying" my car, short of a dualband antenna and a radio with a remote mount head. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com I was responding to Andy KC2SSB who said, and I quote, "My next truck, I am going to wire quite a few of them in there, with adequate wiring, at least for the stuff requiring 15amps or less, with the source for those sockets coming from the battery direct." Dick - W6CCD |
#9
![]() |
|||
|
|||
![]()
Trying locating one of the grommets on the firewall and feed a fairly decent
wire (two conductor wire) to the battery that way. No damage if you are using an existing source entry point. Works well especially for those leasing a vehicle. If it is large enough, you might also be able to run other devices as well. -- Ryan, KC8PMX FF1-FF2-MFR-(pending NREMT-B!) --. --- -.. ... .- -. --. . .-.. ... .- .-. . ..-. .. .-. . ..-. ... --. .... - . .-. ... "VHFRadioBuff" wrote in message ... Why not wire in a bank of PowerPoles instead. Much neater and smaller installation. I use PowerPoles on everything now. Dick - W6CCD Because my car has an accessory port and I am not about to go "hamifying" my car, short of a dualband antenna and a radio with a remote mount head. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com |
#10
![]() |
|||
|
|||
![]()
Trying locating one of the grommets on the firewall and feed a fairly decent
wire (two conductor wire) to the battery that way. No damage if you are using an existing source entry point. Works well especially for those leasing a vehicle. If it is large enough, you might also be able to run other devices as well. -- Ryan, KC8PMX FF1-FF2-MFR-(pending NREMT-B!) --. --- -.. ... .- -. --. . .-.. ... .- .-. . ..-. .. .-. . ..-. ... --. .... - . .-. ... "VHFRadioBuff" wrote in message ... Why not wire in a bank of PowerPoles instead. Much neater and smaller installation. I use PowerPoles on everything now. Dick - W6CCD Because my car has an accessory port and I am not about to go "hamifying" my car, short of a dualband antenna and a radio with a remote mount head. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- 73! de Andy KC2SSB - WPYI880 (GMRS) Beachwood, NJ USA! Grid FM29vw http://vhfradiobuff.tripod.com |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Wanted: Power Supply for TR-4C | Boatanchors | |||
Wanted: Power Supply for TR-4C | Boatanchors | |||
Current in loading coil, EZNEC - helix | Antenna | |||
Derivation of the Reflection Coefficient? | Antenna |