Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old October 5th 03, 05:09 AM
VHFRadioBuff
 
Posts: n/a
Default

I had assumed that the accessory port used the common lighter sockets as
power
connectors. If that is not true, perhaps they use a connector that would be
better for general high current use. Please elaborate.


The accessory port I am refering to is seperate from the cigarette lighter. As
a matter of fact, the owner's manual says not to use the cigarette lighter plug
for anything other than the cigarette lighter. There is no rating in the book
or on the cap for the accessory port that tells the max amps that can be drawn.
It looks like I'll have to run wires to the battery after all.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
73! de Andy KC2SSB - WPYI880 (GMRS)
Beachwood, NJ USA! Grid FM29vw
http://vhfradiobuff.tripod.com
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: Power Supply for TR-4C KA9S-3_Jeff Boatanchors 20 December 16th 04 08:51 AM
Wanted: Power Supply for TR-4C KA9S-3_Jeff Boatanchors 0 December 8th 04 10:31 PM
Current in loading coil, EZNEC - helix Yuri Blanarovich Antenna 334 November 9th 04 06:45 PM
Derivation of the Reflection Coefficient? Dr. Slick Antenna 104 September 6th 03 03:27 AM


All times are GMT +1. The time now is 12:29 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017