Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Advice on choosing TNC
hi all,
i have been out of amateur radio for a good number of years. i have finally got the room (garden and house!) for a few rigs, and i'd like to get back into packet. I would like to have the capability to do packet on V/UHF and also via satellite (if I can get an antenna up for it). I am also very interested in aprs (looks very useful) so the TNC would have to be usable with GPS/etc. I run a Icom IC-207 V/UHF, a Kenwood TH78e handie, and a Yaesu FT707 for HF. I mainly use Mac OS X, or at times Windows XP, so the TNC would have to be supported by Mac TNC software. any help greatly appreciate, 73s de bernard ei8fdb |
#2
|
|||
|
|||
Advice on choosing TNC
BERNARD,
I too am still active in PACKET however I use a Commodore 128 for all my uses. One for internet use and another setup for Packet on VHF only. I use GERMAN software called DIGICOM V5 which uses the worldwide compatible software. I built my own TNC strictly for PACKET/VHF. In Hawaii we have a statewide packet digiptr setup, with the digi on top of Mt Haleakala. I can easily reach that. I think its APRS which has a lot of addnl cmds I am not familiar with. As to TNC'S that will work with PC's and or COMMODORE computers the following commercial TNC's are all suitable. MFJ (makes several versions) Packrat PK232's with latest upgrade ROMS also (useable with Commodores if adapter is also included. KAM+ Kantronics also with latest ROMS is MBX and fully compatible. Hope this helps. I was handling all MARS traffic via Packet between Ft Huachuca Az and Schofield Barracks in Honolulu for many years till I finally resigned last year. After 70 years with pre WW2 then MARS till last year I decided I better rest and take it easy. Joe/KH6JF (previously ABM6JF) MARS Call ************************************************** ************************ * Ham since 1937 HiSchool Sophomore ex W9ZUU, KP4EX, W4FAG, KH6ARG KH6JF * * WW2 Vet since Sep 1940 to just After VJ day. US Signal Corps AACS * ************************************************** ************************ |
#3
|
|||
|
|||
Advice on choosing TNC
"blue box thief" "blue box wrote in message in...
hi all, i have been out of amateur radio for a good number of years. i have finally got the room (garden and house!) for a few rigs, and i'd like to get back into packet. I would like to have the capability to do packet on V/UHF and also via satellite (if I can get an antenna up for it). I am also very interested in aprs (looks very useful) so the TNC would have to be usable with GPS/etc. I run a Icom IC-207 V/UHF, a Kenwood TH78e handie, and a Yaesu FT707 for HF. I mainly use Mac OS X, or at times Windows XP, so the TNC would have to be supported by Mac TNC software. any help greatly appreciate, 73s de bernard ei8fdb A TNC can be operated from a dumb terminal through an RS232 port. You can use any terminal program with your computer--I've used Windows HyperTerminal. You tend to need to keep the TNC command line book handy when using a terminal program. Software specific to TNCs (e.g., HostMaster) make operating the TNC more user friendly. Hope that helps. 73 de Glenn AA5PK |
#4
|
|||
|
|||
Advice on choosing TNC
Check Kantronics and also the AMSAT and TAPR websites and bulletin
boards. Some of the digital satellites required a manchester modification to the uplink, but I think that is passe. Bob Bruiniga is the guru on these so you might look him up and send an e-mail to him. blue box thief wrote: hi all, i have been out of amateur radio for a good number of years. i have finally got the room (garden and house!) for a few rigs, and i'd like to get back into packet. I would like to have the capability to do packet on V/UHF and also via satellite (if I can get an antenna up for it). I am also very interested in aprs (looks very useful) so the TNC would have to be usable with GPS/etc. I run a Icom IC-207 V/UHF, a Kenwood TH78e handie, and a Yaesu FT707 for HF. I mainly use Mac OS X, or at times Windows XP, so the TNC would have to be supported by Mac TNC software. any help greatly appreciate, 73s de bernard ei8fdb -- Joe Leikhim K4SAT "The RFI-EMI-GUY"© "Treason doth never prosper: what's the reason? For if it prosper, none dare call it treason." "Follow The Money" ;-P |
#5
|
|||
|
|||
Advice on choosing TNC
On 2007-04-12, Glenn wrote:
A TNC can be operated from a dumb terminal through an RS232 port. You can use any terminal program with your computer--I've used Windows HyperTerminal. You tend to need to keep the TNC command line book handy when using a terminal program. Software specific to TNCs (e.g., HostMaster) make operating the TNC more user friendly. Hi Glenn, well thats the main reason why i was looking for a tnc - i could run it with any os, and a rs232 prt. the tnc i managed to pickup (pk232) comes with manuals so it should make things easier for me! thanks bernard |
#6
|
|||
|
|||
Advice on choosing TNC
On Mon, 16 Apr 2007, blue box thief wrote: On 2007-04-12, Glenn wrote: A TNC can be operated from a dumb terminal through an RS232 port. You can use any terminal program with your computer--I've used Windows HyperTerminal. You tend to need to keep the TNC command line book handy when using a terminal program. Software specific to TNCs (e.g., HostMaster) make operating the TNC more user friendly. Hi Glenn, well thats the main reason why i was looking for a tnc - i could run it with any os, and a rs232 prt. the tnc i managed to pickup (pk232) comes with manuals so it should make things easier for me! thanks bernard There are a nr of TNC'S commercially available such as the MFJ series, the KAM+, the PK-232's. etc. The limitations involved. depend on whether the KAM's and PK232's have the upgraded ROM chips in them. Make sure they do as the features are vastly improved if the Upgrade chips are in them. Joe |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help Choosing A Radio | Shortwave | |||
help with choosing parts for project | General | |||
Choosing mobile HF antennas. | Antenna | |||
Choosing a FET (2SK19) replacement for 1970s vintage solid stateam/shortwave receiver. Advice Sought | Shortwave |