Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #41   Report Post  
Old November 13th 03, 05:44 PM
Jerry Oxendine
 
Posts: n/a
Default


"Paul Clay" wrote in message
...
Do any of the solid state rigs from the mid-80s to present put out a
good AM signal? If so, which ones? Is the conventional wisdom true
that only by resurrecting a boatanchor tube transmitter can an operator
get a nice sounding AM signal?

Thanks!

Am surprised that none of the below posts mentioned the Icom 706 series! My
IC706 (both of them) do excellent sounding AM and I have gotten quite a few
compliments.


73

Jerry
K4KWH



  #42   Report Post  
Old November 28th 03, 06:27 AM
Rocky
 
Posts: n/a
Default



Do any of the solid state rigs from the mid-80s to present put out a
good AM signal? If so, which ones? Is the conventional wisdom true
that only by resurrecting a boatanchor tube transmitter can an operator
get a nice sounding AM signal?

Thanks!

Am surprised that none of the below posts mentioned the Icom 706 series!

My
IC706 (both of them) do excellent sounding AM and I have gotten quite a

few
compliments.


73

Jerry
K4KWH


Nothing sounds better than tubes and AM. I love the old stuff.
Those old tube transmitters and recievers sounded great.
Heath kit and Knight kit. Point to point wiring and tubes!!!
Ahhhh, those were the days.


Rocky



  #43   Report Post  
Old November 28th 03, 06:27 AM
Rocky
 
Posts: n/a
Default



Do any of the solid state rigs from the mid-80s to present put out a
good AM signal? If so, which ones? Is the conventional wisdom true
that only by resurrecting a boatanchor tube transmitter can an operator
get a nice sounding AM signal?

Thanks!

Am surprised that none of the below posts mentioned the Icom 706 series!

My
IC706 (both of them) do excellent sounding AM and I have gotten quite a

few
compliments.


73

Jerry
K4KWH


Nothing sounds better than tubes and AM. I love the old stuff.
Those old tube transmitters and recievers sounded great.
Heath kit and Knight kit. Point to point wiring and tubes!!!
Ahhhh, those were the days.


Rocky



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Heathkit HD-1250 Solid State Dip Meter-Unbuilt Kit Dave Hollander Boatanchors 0 June 1st 04 04:08 PM
FS: Solid State 866's and EV Microphone Dave Hollander Boatanchors 0 May 21st 04 05:35 AM
How to solid state a tube HFO? John Ely Boatanchors 0 October 24th 03 01:46 PM
Rare Books on Electronics and Radio and Commmunications Hania Lux Equipment 0 October 22nd 03 07:48 PM
Rare Books on Electronics and Radio and Commmunications Hania Lux Equipment 0 October 22nd 03 07:48 PM


All times are GMT +1. The time now is 09:06 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017