Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old December 30th 07, 12:14 AM posted to rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Dec 2007
Posts: 1
Default Yeasu Portable Battery Schematics

Does anyone have/know the wiring configuration of the connections on
Yaseu Portable battery packs?

Specifically I would like to connect an external power source to one
of my portables (FT-51r) and would like to look at a schematic before
making connections incorrectly and cooking my radio.

I also have the following Yaesu portable models FT-411, FT-530, and
suspect the batteries have similar wiring configurations.

I have checked the Internet, Yaesu, and after market battery outfits
with little usable response.

Thank you in advance for any assistance you may be able to provide.

******************************

I am also looking for the following accessories to allow connecting
external power to my Yaesu Ft 51r Ham radio.

EDC-12 Allows connecting to a cigarette plug in a car or power supply.

FBA-14 Allows operating the radio on four AA batteries.

I would also like to buy a dead battery for the same radio to tear
apart and build my own adapter.

Depending on what you have I might also be interested in other
accessories for my radio.

Thank you.
  #2   Report Post  
Old February 22nd 08, 07:38 PM posted to rec.radio.amateur.equipment
external usenet poster
 
First recorded activity by RadioBanter: Feb 2008
Posts: 5
Default Yeasu Portable Battery Schematics

FT-530 is more easily powered from the top external power connector
~6-15Volts (likes 9-13v). It will also charge the radio battery while the
radio operates. The radio battery wants to be above ground when charging,
so there could be problems if using vehicle power to a fake battery.

The other radios are similar but have different batteries or voltages. Use
the stock power kits or check the service manuals if you want to make a hard
wired solution.


"No Spam" wrote in message
...
Does anyone have/know the wiring configuration of the connections on
Yaseu Portable battery packs?

Specifically I would like to connect an external power source to one
of my portables (FT-51r) and would like to look at a schematic before
making connections incorrectly and cooking my radio.

I also have the following Yaesu portable models FT-411, FT-530, and
suspect the batteries have similar wiring configurations.

I have checked the Internet, Yaesu, and after market battery outfits
with little usable response.

Thank you in advance for any assistance you may be able to provide.

******************************

I am also looking for the following accessories to allow connecting
external power to my Yaesu Ft 51r Ham radio.

EDC-12 Allows connecting to a cigarette plug in a car or power supply.

FBA-14 Allows operating the radio on four AA batteries.

I would also like to buy a dead battery for the same radio to tear
apart and build my own adapter.

Depending on what you have I might also be interested in other
accessories for my radio.

Thank you.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Yeasu Portable Battery Schematics [email protected] Homebrew 0 December 29th 07 10:43 PM
looking for a small portable Battery AM/FM with good reception... noname[_2_] Shortwave 3 August 2nd 07 12:58 AM
FS 1946 RCA 54B1 Battery Operated Portable [email protected] Boatanchors 0 June 14th 06 05:21 AM
FA: HT1250ls UHF Portable with Charger & Big Battery !Lou Swap 0 February 20th 04 07:56 PM


All times are GMT +1. The time now is 08:21 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017