| Home |
| Search |
| Today's Posts |
|
|
|
#1
March 30th 08, 02:52 PM
|
|||
|
|||
ft-530, IC-T90A battery packs
Does anyone have any experience with changing the batteries in a FT-530 pack? Mine are all FNB-27's 12v 1100mAh packs. Also has anyone seen any long lasting packs for the IC-T90A?
|
|
#2
April 3rd 08, 05:12 PM
posted to rec.radio.amateur.equipment
|
|||
|
|||
|
ft-530, IC-T90A battery packs
FNB-27 Carefully crack the weld all the way around, slit through the
label, pry with screwdriver from the bottom between the pack inside and the plastic wall. beware of shorts and sparks. The pack is usually glued with silicon or monkey snot to the sides. If you don't screw up the top rails all should be well. New pack can be sandwiched with a little silicone cement to the sides. Don't worry about the cracked welds. "ad4vs" wrote in message ... Does anyone have any experience with changing the batteries in a FT-530 pack? Mine are all FNB-27's 12v 1100mAh packs. Also has anyone seen any long lasting packs for the IC-T90A? -- ad4vs |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS NOS 2 way radio battery packs | Swap | |||
| Question Regarding Re-building The Ni-Cad Battery Packs For The R.S. HTX-202 & HTX-204 | General | |||
| FS Battery Packs | Swap | |||
| FS ICOM H-16 and 2 lg battery packs, cgr ant | Swap | |||
| Uniden Battery Packs | Scanner | |||
Hybrid Mode
