| Home |
| Search |
| Today's Posts |
|
#9
December 15th 03, 08:17 PM
|
|||
|
|||
"VE3TMT" ) writes:
"louis" wrote in message om... hi my old bsr xl-1200 cartridge is wired onto the pins so it wont pop out with the 4 prongs as normal one's do. i think i could remove the wires and put each one onto the prongs of a new cartridge but it seems that the bsr cartridge is proprietary. there is one screw on top of the tone arm that holds my cartridge. i'm not sure it will screw into a new one such as the at3482u. anyone here ahve a solution? i could get another direct replacement for the bsr cartridge perhaps but i thought the 3482u (or another) would give me better sound than what i have now. i could perhaps just snap the new cartridge in without screws. all the wires in the tonearm are very thin so its hard to solder in there. please email me a copy of your response. thanks louis And this deals with ham radio in what way?? Who knows, and the guy is particularly clueless. This is at least the second rec.radio.amateur.* newsgroup he's posted to about his turntable, and he also hit rec.radio.shortwave Michael VE2BVW |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Home brew antenna for FCC Part 15 screening? | Antenna | |||
| Looking for ant measurement software/hardware | Antenna | |||
| bsr turntable | Boatanchors | |||
Threaded Mode
