|
Has the radio been sitting unplugged for a long period? If so , plug
it in for a few days and see if that will bring it back to life. I had a similar problem on my R-5000 and that was the fix. No further problems after 7 or 8 years. Regards Bob "Kurt" wrote in message ... "Kurt" schreef in bericht ... Hello , I have troubles with my Kenwood TS-450-SAT . When i power on the transceiver i get a cw code and in stead of the frequency i get dots on the screen . Also i can't receive or transmit . Anyone know this problem ? Can't find this problem in the manual . I found something : " The row of dots on the main display indicates that a PLL is out of lock " . I think i need the service manual . |
"Bob" schreef in bericht
om... Has the radio been sitting unplugged for a long period? If so , plug it in for a few days and see if that will bring it back to life. I had a similar problem on my R-5000 and that was the fix. No further problems after 7 or 8 years. Regards Bob Hi Bob , What do you mean with a long period ? I didn't used the transceiver for about 1 month . Regards , Kurt |
"Bob" schreef in bericht
om... Has the radio been sitting unplugged for a long period? If so , plug it in for a few days and see if that will bring it back to life. I had a similar problem on my R-5000 and that was the fix. No further problems after 7 or 8 years. Regards Bob Hi Bob , What do you mean with a long period ? I didn't used the transceiver for about 1 month . Regards , Kurt |
Kurt: I had gone on holidays for about 3 weeks and disconnected
antenna and power. When I powered it up all I got was a line of dots and no audio. I called a few dealers but none were familiar with the problem. Next day I turned it on and I got audio for about one minute but as soon as I turned the volume up more than half way the dots reappeared and the audio was dead. Another day went by and I tried again. This time the radio stayed on and would work normally but an increase in volume knocked it out again. On the third day it worked normally and has ever since. I do not unplug it except briefly to move it from one spot in the house to another. I have no idea why this glitch happened. Hope yours responds as easily. Regards, Bob Kurt" wrote in message ... "Bob" schreef in bericht om... Has the radio been sitting unplugged for a long period? If so , plug it in for a few days and see if that will bring it back to life. I had a similar problem on my R-5000 and that was the fix. No further problems after 7 or 8 years. Regards Bob Hi Bob , What do you mean with a long period ? I didn't used the transceiver for about 1 month . Regards , Kurt |
Kurt: I had gone on holidays for about 3 weeks and disconnected
antenna and power. When I powered it up all I got was a line of dots and no audio. I called a few dealers but none were familiar with the problem. Next day I turned it on and I got audio for about one minute but as soon as I turned the volume up more than half way the dots reappeared and the audio was dead. Another day went by and I tried again. This time the radio stayed on and would work normally but an increase in volume knocked it out again. On the third day it worked normally and has ever since. I do not unplug it except briefly to move it from one spot in the house to another. I have no idea why this glitch happened. Hope yours responds as easily. Regards, Bob Kurt" wrote in message ... "Bob" schreef in bericht om... Has the radio been sitting unplugged for a long period? If so , plug it in for a few days and see if that will bring it back to life. I had a similar problem on my R-5000 and that was the fix. No further problems after 7 or 8 years. Regards Bob Hi Bob , What do you mean with a long period ? I didn't used the transceiver for about 1 month . Regards , Kurt |
"helmsman" schreef in bericht
... "Kurt" wrote: Hello , I have troubles with my Kenwood TS-450-SAT . When i power on the transceiver i get a cw code and in stead of the frequency i get dots on the screen . Also i can't receive or transmit . Anyone know this problem ? Can't find this problem in the manual . Many thanks , Kurt What is the sound you hear in code - what doe's it say?? It say UL . Kurt |
"helmsman" schreef in bericht
... "Kurt" wrote: Hello , I have troubles with my Kenwood TS-450-SAT . When i power on the transceiver i get a cw code and in stead of the frequency i get dots on the screen . Also i can't receive or transmit . Anyone know this problem ? Can't find this problem in the manual . Many thanks , Kurt What is the sound you hear in code - what doe's it say?? It say UL . Kurt |
"Bob" schreef in bericht
om... Kurt: I had gone on holidays for about 3 weeks and disconnected antenna and power. When I powered it up all I got was a line of dots and no audio. I called a few dealers but none were familiar with the problem. Next day I turned it on and I got audio for about one minute but as soon as I turned the volume up more than half way the dots reappeared and the audio was dead. Another day went by and I tried again. This time the radio stayed on and would work normally but an increase in volume knocked it out again. On the third day it worked normally and has ever since. I do not unplug it except briefly to move it from one spot in the house to another. I have no idea why this glitch happened. Hope yours responds as easily. Regards, Bob Hi Bob , I get the problem more and more , every time when i power on the tx , even when i turned it off for 1 minute .I will take a look on it and let you know what is is/was . If i can't fix it i take it to Kenwood , it's only 20 min to drive . Many thanks , Kurt |
"Bob" schreef in bericht
om... Kurt: I had gone on holidays for about 3 weeks and disconnected antenna and power. When I powered it up all I got was a line of dots and no audio. I called a few dealers but none were familiar with the problem. Next day I turned it on and I got audio for about one minute but as soon as I turned the volume up more than half way the dots reappeared and the audio was dead. Another day went by and I tried again. This time the radio stayed on and would work normally but an increase in volume knocked it out again. On the third day it worked normally and has ever since. I do not unplug it except briefly to move it from one spot in the house to another. I have no idea why this glitch happened. Hope yours responds as easily. Regards, Bob Hi Bob , I get the problem more and more , every time when i power on the tx , even when i turned it off for 1 minute .I will take a look on it and let you know what is is/was . If i can't fix it i take it to Kenwood , it's only 20 min to drive . Many thanks , Kurt |
In message , Kurt
writes "helmsman" schreef in bericht .. . "Kurt" wrote: Hello , I have troubles with my Kenwood TS-450-SAT . When i power on the transceiver i get a cw code and in stead of the frequency i get dots on the screen . Also i can't receive or transmit . Anyone know this problem ? Can't find this problem in the manual . Many thanks , Kurt What is the sound you hear in code - what doe's it say?? It say UL . Unlocked? As in PLL Just a guess Trev G3ZYY -- Trevor Day |
| All times are GMT +1. The time now is 06:11 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
RadioBanter.com