In article , zeno wrote:

OK, I know this unit is total out of date and apparently had
some glitches, but it came along with an entire lot I
obtained which contained some other really good stuff, so in
a sense I have almost nothing invested in this solid state
boat anchor, but how bad can it really be, afterall it was
apparently Yaesu's top of the line transceiver a couple of
decades ago.

Might I not have some fun with it for awhile until I decide
what better thing to get? I am a new returning ham after more
decades than this outmoded transceiver. Apparently it was
both ahead of its time and outmoded as soon as it came out in
the early 80s. There was not very much info online but
apparently many European hams used it for awhile. I am just
getting started and am not sure what to really invest in.
This Yaesu is in working condition and the old guy getting
rid of it (and a whole garage full of other stuff), thought
it was pretty great when he last used it. Anyone have
anything good to say? Actually I haven't even hooked it up
yet.

Bill, K6TAJ

There was a article in Communications Quarterly several years ago about
stablilizing the thing and adding a 10 hz display. It's got several
oscillators and they all float around. The crystals were part of the
problem, but also the use of cheap trimmer caps which were replaced with
piston trimmers in the article. A fun rig to play around with, but you
might need to get some extender cards if you can find them otherwise
jury rig up with wires to card connectors (a mess).

Enjoy

Dale, K9VUJ
--

wrote:

In article , zeno wrote:

OK, I know this unit is total out of date and apparently had
some glitches, but it came along with an entire lot I
obtained which contained some other really good stuff, so in
a sense I have almost nothing invested in this solid state
boat anchor, but how bad can it really be, afterall it was
apparently Yaesu's top of the line transceiver a couple of
decades ago.

Might I not have some fun with it for awhile until I decide
what better thing to get? I am a new returning ham after more
decades than this outmoded transceiver. Apparently it was
both ahead of its time and outmoded as soon as it came out in
the early 80s. There was not very much info online but
apparently many European hams used it for awhile. I am just
getting started and am not sure what to really invest in.
This Yaesu is in working condition and the old guy getting
rid of it (and a whole garage full of other stuff), thought
it was pretty great when he last used it. Anyone have
anything good to say? Actually I haven't even hooked it up
yet.

Bill, K6TAJ

There was a article in Communications Quarterly several years ago about
stablilizing the thing and adding a 10 hz display. It's got several
oscillators and they all float around. The crystals were part of the
problem, but also the use of cheap trimmer caps which were replaced with
piston trimmers in the article. A fun rig to play around with, but you
might need to get some extender cards if you can find them otherwise
jury rig up with wires to card connectors (a mess).

Enjoy

Dale, K9VUJ
--


Hi Dale,

There are a bunch of "cards" here in a plastic bag which the ex-owner said
were used when working on the rig. Is that what you are talking about? It
might be interesting to track down that article in Communications
Quarterly, do you have any more info on that source?

Bill, K6TAJ

In article , zeno wrote:



Hi Dale,

There are a bunch of "cards" here in a plastic bag which the ex-owner said
were used when working on the rig. Is that what you are talking about? It
might be interesting to track down that article in Communications
Quarterly, do you have any more info on that source?

Bill, K6TAJ

Bill,

I'll see if I can find out the article and get back to you. If you are
really into this radio it can be a fun project. International Crystal
has the stats for the high stability crystals, at least as of a few
years ago. The piston trimmers are about $10, but worth it.

It sounds like you have the extender cards which is very good indeed.

Dale
--

wrote:

In article , zeno wrote:



Hi Dale,

There are a bunch of "cards" here in a plastic bag which the ex-owner said
were used when working on the rig. Is that what you are talking about? It
might be interesting to track down that article in Communications
Quarterly, do you have any more info on that source?

Bill, K6TAJ

Bill,

I'll see if I can find out the article and get back to you. If you are
really into this radio it can be a fun project. International Crystal
has the stats for the high stability crystals, at least as of a few
years ago. The piston trimmers are about $10, but worth it.

It sounds like you have the extender cards which is very good indeed.

Dale

I will contact International Crystal to see what they have. What exactly was
the problem with the crystals that Yaesu provided for this unit. The one I have
came with almost all the available Yaesu crystals.


Bill K6TAJ

wrote:

In article , zeno wrote:



Hi Dale,

There are a bunch of "cards" here in a plastic bag which the ex-owner said
were used when working on the rig. Is that what you are talking about? It
might be interesting to track down that article in Communications
Quarterly, do you have any more info on that source?

Bill, K6TAJ

Bill,

I'll see if I can find out the article and get back to you. If you are
really into this radio it can be a fun project. International Crystal
has the stats for the high stability crystals, at least as of a few
years ago. The piston trimmers are about $10, but worth it.

It sounds like you have the extender cards which is very good indeed.

Dale

I will contact International Crystal to see what they have. What exactly was
the problem with the crystals that Yaesu provided for this unit. The one I have
came with almost all the available Yaesu crystals.


Bill K6TAJ

In article , zeno wrote:



Hi Dale,

There are a bunch of "cards" here in a plastic bag which the ex-owner said
were used when working on the rig. Is that what you are talking about? It
might be interesting to track down that article in Communications
Quarterly, do you have any more info on that source?

Bill, K6TAJ

Bill,

I'll see if I can find out the article and get back to you. If you are
really into this radio it can be a fun project. International Crystal
has the stats for the high stability crystals, at least as of a few
years ago. The piston trimmers are about $10, but worth it.

It sounds like you have the extender cards which is very good indeed.

Dale
--

wrote:

In article , zeno wrote:

OK, I know this unit is total out of date and apparently had
some glitches, but it came along with an entire lot I
obtained which contained some other really good stuff, so in
a sense I have almost nothing invested in this solid state
boat anchor, but how bad can it really be, afterall it was
apparently Yaesu's top of the line transceiver a couple of
decades ago.

Might I not have some fun with it for awhile until I decide
what better thing to get? I am a new returning ham after more
decades than this outmoded transceiver. Apparently it was
both ahead of its time and outmoded as soon as it came out in
the early 80s. There was not very much info online but
apparently many European hams used it for awhile. I am just
getting started and am not sure what to really invest in.
This Yaesu is in working condition and the old guy getting
rid of it (and a whole garage full of other stuff), thought
it was pretty great when he last used it. Anyone have
anything good to say? Actually I haven't even hooked it up
yet.

Bill, K6TAJ

There was a article in Communications Quarterly several years ago about
stablilizing the thing and adding a 10 hz display. It's got several
oscillators and they all float around. The crystals were part of the
problem, but also the use of cheap trimmer caps which were replaced with
piston trimmers in the article. A fun rig to play around with, but you
might need to get some extender cards if you can find them otherwise
jury rig up with wires to card connectors (a mess).

Enjoy

Dale, K9VUJ
--


Hi Dale,

There are a bunch of "cards" here in a plastic bag which the ex-owner said
were used when working on the rig. Is that what you are talking about? It
might be interesting to track down that article in Communications
Quarterly, do you have any more info on that source?

Bill, K6TAJ