| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
To cut to the chase, I''m in the market for a transciver that can
cover the 6 Meter band, and I'd like some advice. What I'm looking for, is as follows.At a minumum, I wuld like to have at least 15 to 25 watts of Output Power.Coverage of the 6 Meter band is an obvious (minimum) requrement, though as many other bands as is possible would be nice. I'm hoping that at least some portion of 2M/1.25M/70CM/33CM is possible, but I'll take what I can get. Being a HT would also be nice, though I have little hope of this point being within my budget. With that said, I'm on a rather tight budget, and am not willing to spend substantially more then $200 (US Dollars) (nothing is absolute. But I would need an EXTRORDINARY motivation, to go over, say, $225.), and would strongly prefer to spend comething closer to $100 to $150. So, does the communnity have any advice on what would make for a good, low cost 6 Meter Transciever? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| scanner/transciever? | Equipment | |||
| transciever output Z | Antenna | |||
| Magnetron as RF transciever | Homebrew | |||
| WTB uhf mobile transciever | Swap | |||
| FS: Clegg Transciever & Amp | Swap | |||