| Home |
| Search |
| Today's Posts |
|
|
|
#1
February 12th 06, 04:44 PM
posted to rec.radio.amateur.equipment
|
|||
|
|||
CB mic wiring
Dick wrote:
On Fri, 10 Feb 2006 21:27:07 -0700, Diamond Dave wrote: On Fri, 10 Feb 2006 19:35:44 -0600, "Noon-Air" wrote: AMEN! JCB If you absolutely must use a beeper, then do it on the Childrens Band.. not on the HAM bands. Except for repeaters, they have no good use, but if you must, I agree with the above. A distinction here is that the repeater itself puts the tone on to signify when the timer has started. The tone is not superimposed by the person using the repeater. There are only a couple of times when transmitted audible tones are used. One is for a repeater autopatch. The other is to awaken Litz decoders for emergency traffic. Beyond those two applications, audible tones have no place in amateur radio. They need to stay in CB land. Dick - W6CCD |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Anyone know power plug wiring for SBE-33? | Boatanchors | |||
| Mike wiring for Icom IC-725 | Equipment | |||
| Mike wiring for Icom IC-725 | Equipment | |||
| yaesu FC-20 data cable wiring | Equipment | |||
| yaesu FC-20 data cable wiring | Equipment | |||
Hybrid Mode
