| Home |
| Search |
| Today's Posts |
|
#1
|
|||
|
|||
|
What is the best way to clean up the front end
of the older 70-s80-s radios (icom 751 icom 271 etc,,,Tnx |
|
#2
|
|||
|
|||
|
"ZEB" wrote in message news:OuORf.11168$Km6.5866@trnddc01... What is the best way to clean up the front end of the older 70-s80-s radios (icom 751 icom 271 etc,,,Tnx The way I do it is as follows ; Remove all switches, knobs, dials ect. Then remove the front cover ( sometimes you may need to remove locking nuts ect to release the cover completely ). Then it's just a matter of cleaning every nook and cranny with a solution of WARM water and washing-up liquid in a CLEAN plastic bowl. Dry and set a side until all moisture has evaporated then re-assembly. It's best not to use any other cleaning agents I find. You may want to take a look at items that may require lubrication while you have the front panel removed. Hope this helps..................cheers, Ken, G4KIR. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Front end overload | Antenna | |||
| I would like to interview either Steve or Bryant on one of my shows of "On the Domestic Front"! | Shortwave | |||
| Broken/parts rigs wanted | Swap | |||
| FT-8900--How to Remove Remote Front Panel? | Equipment | |||