On Wed, 20 Aug 2003 17:55:35 GMT, "Martin"
wrote:

I'd appreciate any comments, pro and con, from actual users of the
IC-706MKIIG. Performance, reliability, service problems, etc.

As it's described it seems to have features I'd like and need: small size,
both HF and VHF, and a reasonable power level. Any suggestions as to other
rigs with similar features would be appreciated also.

Marty K1FHR

hi, marty. i've got a MKIIG in my camper and use it when
camping...not as often as i'd like. no problems with it at all. it
performs well. i guess the only "complaint' i'd have is trying to
remember all of the functions. but that's a problem with most moden
rigs.

73,
rich, n9dko

On Wed, 20 Aug 2003 17:55:35 GMT, "Martin"
wrote:

I'd appreciate any comments, pro and con, from actual users of the
IC-706MKIIG. Performance, reliability, service problems, etc.

As it's described it seems to have features I'd like and need: small size,
both HF and VHF, and a reasonable power level. Any suggestions as to other
rigs with similar features would be appreciated also.

Marty K1FHR

hi, marty. i've got a MKIIG in my camper and use it when
camping...not as often as i'd like. no problems with it at all. it
performs well. i guess the only "complaint' i'd have is trying to
remember all of the functions. but that's a problem with most moden
rigs.

73,
rich, n9dko

Well, Martin, I use mine in my Semi truck, getting beat up by the
Arkansas, Michigan, Pennsylvania, New Mexico, Arizona, and California
roads all the time as I roll on delivering freight. It's never let me
down once. One comment, though, if you plan on using it while rolling,
the narrow SSB filter is almost a MUST. Makes listening through the
"tire static" (yes, it really does exist. I have proof.) much easier.

73 de AI8W, Chris

Martin wrote:

I'd appreciate any comments, pro and con, from actual users of the
IC-706MKIIG. Performance, reliability, service problems, etc.

As it's described it seems to have features I'd like and need: small size,
both HF and VHF, and a reasonable power level. Any suggestions as to other
rigs with similar features would be appreciated also.

Marty K1FHR

Well, Martin, I use mine in my Semi truck, getting beat up by the
Arkansas, Michigan, Pennsylvania, New Mexico, Arizona, and California
roads all the time as I roll on delivering freight. It's never let me
down once. One comment, though, if you plan on using it while rolling,
the narrow SSB filter is almost a MUST. Makes listening through the
"tire static" (yes, it really does exist. I have proof.) much easier.

73 de AI8W, Chris

Martin wrote:

I'd appreciate any comments, pro and con, from actual users of the
IC-706MKIIG. Performance, reliability, service problems, etc.

As it's described it seems to have features I'd like and need: small size,
both HF and VHF, and a reasonable power level. Any suggestions as to other
rigs with similar features would be appreciated also.

Marty K1FHR

sideband wrote in message Makes listening through the
"tire static" (yes, it really does exist. I have proof.) much easier.

73 de AI8W, Chris

Yes it does exist. I bet the greater bulk of the noise I get at road
speeds is tire static. If I stop, even with the engine running, it's
pretty quiet. But at highway speeds, my noise will jump up a good bit.
I've heard of various cures, ranging from anti-static powder in the
tires, to springs you insert in the wheel bearing caps to make a
better electrical connection across the bearings I presume. I've never
bothered trying any of them yet. I just turn on the NB... MK

sideband wrote in message Makes listening through the
"tire static" (yes, it really does exist. I have proof.) much easier.

73 de AI8W, Chris

Yes it does exist. I bet the greater bulk of the noise I get at road
speeds is tire static. If I stop, even with the engine running, it's
pretty quiet. But at highway speeds, my noise will jump up a good bit.
I've heard of various cures, ranging from anti-static powder in the
tires, to springs you insert in the wheel bearing caps to make a
better electrical connection across the bearings I presume. I've never
bothered trying any of them yet. I just turn on the NB... MK

Re 20 meter hamstick and AH-4:

Do you mean you are using an AH-4 to tune the 20 m hamstick
to other bands? If so, to which bands and what kind of SWR's?

Bob K9KKY

Re 20 meter hamstick and AH-4:

Do you mean you are using an AH-4 to tune the 20 m hamstick
to other bands? If so, to which bands and what kind of SWR's?

Bob K9KKY

Thanks for all of the comments and references. Obviously it's a well
thought of rig. I think it will suit my needs nicely.

After 41 years of hamming I decided give it up and recently sold, gave away
and junked a 50+ year accumulation of stuff. Made the xyl deliriously
happy.

Here we go again!

Marty K1FHR


"Martin" wrote in message
.net...
I'd appreciate any comments, pro and con, from actual users of the
IC-706MKIIG. Performance, reliability, service problems, etc.

As it's described it seems to have features I'd like and need: small size,
both HF and VHF, and a reasonable power level. Any suggestions as to
other
rigs with similar features would be appreciated also.

Marty K1FHR

Thanks for all of the comments and references. Obviously it's a well
thought of rig. I think it will suit my needs nicely.

After 41 years of hamming I decided give it up and recently sold, gave away
and junked a 50+ year accumulation of stuff. Made the xyl deliriously
happy.

Here we go again!

Marty K1FHR


"Martin" wrote in message
.net...
I'd appreciate any comments, pro and con, from actual users of the
IC-706MKIIG. Performance, reliability, service problems, etc.

As it's described it seems to have features I'd like and need: small size,
both HF and VHF, and a reasonable power level. Any suggestions as to
other
rigs with similar features would be appreciated also.

Marty K1FHR