Home |
Search |
Today's Posts |
#11
![]() |
|||
|
|||
![]()
"Airy R. Bean" wrote in message
... Your 5 minutes web search has not revealed the theory behind the gravity escapement, a form of remontoire, a means to decouple the pendulum from the going train One of the fundamental problems in time pieces is the decoupling of the escapement from the oscillating element- not from the going train. The issue is ensuring that the oscillation period is not changed by the two functions of the escapement a) to provide the impulse b) to allow the going train to advance at a rate controlled by the oscillator (eg the pendulum). If you think about it, there is an analogy to Q here. In (a) I include the added complications of ensuring an impulse largely constant despite variations in the state of the spring (if used). Over the years many approaches have been tried - verge, deadbeat, cylinder, duplex, and (of course) the lever are the ones that spring to mind from my watch repairing days. I suggest you get hold of deCarl(e)s book on the escapement- I forget the title as it must be 25 years since I read it. Incidently, for a 'joke' you seem to be putting in a lot of effort. The impulse to the pendulum is dependent upon two locally invariant properties, the acceleration due to gravity, and the mass of the Impulse Arms (Dennison/Grimethorpe version) and pendulum. The pendulum is not impulsed by the (weight driven not spring driven) Going Train. Regardless of where the energy comes from, and this is about energy, the fundamental issues are the same: 1. Getting energy 'into' the pendulum to maintain the oscillation. 2. Minimising the interference of the escapement on the pendulum (or other timing element) - also an energy matter. (This could be helped by increasing the 'swing' but that then brings into play other errors due to pendulum length variation with temperature.) The above is true regardless of where the energy for the impulse comes from. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
not cutting excess wire beyond antenna | Antenna | |||
Filament Question | Boatanchors |