Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]() "Bill" wrote in message ... In message , Gordon Hudson writes You don't happen to know why Pye went back to seperate TX and RX with the PF9? The only alternative at the time was the PF70 which was rather large, They could have made a valve set in the same case! the PF8 which was also large And very fragile. The basic chassis was solid as long as the overall screening plate was fitted, but the plastic shell was rubbish. The first time they sustained a minor drop the screws broke through the case and the base cracked under the weight of the batteries. Nice radio electronically, rather advanced for their time, crap case, crap internal aerial. No earphone or mic socket and single channel as well. They have quite a following amongst fans of 'The Professionals' TV series, and a pair can fetch £200. I know because I sold a pair on Ebay! and then the PF85. There was no other small radio. The idea of having separates was good where surveillance concerned as they were easier to hide. The big problem with the PF9T was the previously mentioned PSU. If you detuned the TX PA by putting something conductive near the aerial i.e. your hand then you could hear the inverter whistle!! Not very covert! There were also tails of dogs reacting badly to it. Presumably there must have been a demand for it from their customers, but I can't see the advantage over a transceiver, which is why I thought they did away with seperates after the PF1 PF1s looked pretty on a spectrum analyser though!!!!!!!!!!!!!! Were they dirty? Dave |
#2
![]() |
|||
|
|||
![]()
In message , Dave D
writes rather advanced for their time, crap case, crap internal aerial. Not as bad as the PF6, the metal sliding handle covered the PF5 style aerial! Were they dirty? Very. We were still making a few in 1975/6 until we got an analyser in the dept. that put an end to tuning for max. RF on a diode detector at the bottom of a rabbit hutch as most of it was no where near where it should have been. Dave -- Bill |
#3
![]() |
|||
|
|||
![]()
"Bill" wrote in message
... In message , Dave D writes rather advanced for their time, crap case, crap internal aerial. Not as bad as the PF6, the metal sliding handle covered the PF5 style aerial! Were they dirty? Very. We were still making a few in 1975/6 until we got an analyser in the dept. that put an end to tuning for max. RF on a diode detector at the bottom of a rabbit hutch as most of it was no where near where it should have been. Did you actually use this arrangement in the factory then? I always assumed it was simply a repair shop bit of kit. I made one from cardboard about the time I was first licenced- it was used many times to convert PF1s. I've still got a couple of PF1s in the loft I think- including one rx converted to 2m. -- Brian Reay www.g8osn.org.uk www.amateurradiotraining.org.uk FP#898 |
#4
![]() |
|||
|
|||
![]()
In message , Brian Reay
writes Did you actually use this arrangement in the factory then? I always assumed it was simply a repair shop bit of kit. Yes, I came in after PF1's were all but finished but we still had the wire cage, seem to recall it stood about 4/5 foot high. Blooming long time ago though. I made one from cardboard about the time I was first licenced- it was used many times to convert PF1s. I've still got a couple of PF1s in the loft I think- including one rx converted to 2m. That must have been fun. We used to make VHF PF5's for amusement though. -- Bill |
#5
![]() |
|||
|
|||
![]()
"Bill" wrote in message
... In message , Brian Reay writes Did you actually use this arrangement in the factory then? I always assumed it was simply a repair shop bit of kit. Yes, I came in after PF1's were all but finished but we still had the wire cage, seem to recall it stood about 4/5 foot high. Blooming long time ago though. Don't recall it being quite 5 ft but maybe. I made one from cardboard about the time I was first licenced- it was used many times to convert PF1s. I've still got a couple of PF1s in the loft I think- including one rx converted to 2m. That must have been fun. We used to make VHF PF5's for amusement though. It wasn't two bad actually- bit deaf with the original 'plate' antenna but with a 19" bit of wire it wasn't too bad. Pye kit from that era was a delight to convert and there always seemed to be loads at rallies. -- Brian Reay www.g8osn.org.uk www.amateurradiotraining.org.uk FP#898 |
#6
![]() |
|||
|
|||
![]()
1. Brian, OM, there was no response from you to my offer that you
should consider burying the hatchet. 2. You've stopped responding to me, despite that you were so happy to talk to me at Didcot for the 5 minutes, or so, in total in 5 second bursts that we spent together on Sunday at Didcot. Have I done or said something to offend you? Coming on top of your frequent habit of sneering at ideas that you whine are "bodges", your outburst below seems to be the Freudian Slip of someone who may be quite _INSECURE_ and of a bullying personality, do you not think. "Brian Reay" wrote in message ... I made one from cardboard about the time I was first licenced |
#7
![]() |
|||
|
|||
![]()
Brian, are you sulking in the tradition of a Childish Broadcaster (CBer)?
"Airy R.Bean" wrote in message ... 2. You've stopped responding to me, despite that you were so happy to talk to me at Didcot for the 5 minutes, or so, in total in 5 second bursts that we spent together on Sunday at Didcot. Have I done or said something to offend you? |
#8
![]() |
|||
|
|||
![]()
If someone were to sulk, would that be instrumental in their
habit of sneering in general terms about software, etc, showing an increase as they desperately tried to save face but, in fact, showed _INSECURITY_? "Airy R.Bean" wrote in message ... Brian, are you sulking in the tradition of a Childish Broadcaster (CBer)? "Airy R.Bean" wrote in message ... 2. You've stopped responding to me, despite that you were so happy to talk to me at Didcot for the 5 minutes, or so, in total in 5 second bursts that we spent together on Sunday at Didcot. Have I done or said something to offend you? |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Ranger II 8 prong plug | Boatanchors | |||
Don't Panic! There'll be a new series of HHGG on BBCR4 in late September! | Shortwave | |||
FS: HP/TOSHIBA/COMPAQ AC ADAPTORS $10USDea +shipping | Swap | |||
FS: OLDER HP, TOSHIBA, COMPAQ AC LAPTOP ADAPTORS $15EA+SHIP | Swap |