"Steve H" mycalland remove the blank@arrl .net wrote in message
...

"Jimmie D" wrote in message
...
I have heard there are some tubes that use plate caps that are basically
the same as a 6L6.
The only readon I want to use something like this is because of the
design
of the output transformer
I have. The B+ connection is on the bottom, underside of the chassis,
and
the plate connection is on the top.

Jimmie


807

Steve H



Or, if it needs to be smaller than an 807 and you can find it, a 5B/254M

Peter Able wrote:
"Steve H" mycalland remove the blank@arrl .net wrote in message
...
"Jimmie D" wrote in message
...
I have heard there are some tubes that use plate caps that are basically
the same as a 6L6.
The only readon I want to use something like this is because of the
design
of the output transformer
I have. The B+ connection is on the bottom, underside of the chassis,
and
the plate connection is on the top.

Jimmie


807

Steve H



Or, if it needs to be smaller than an 807 and you can find it, a 5B/254M



Or a 2E26.

On Tue, 05 Jun 2007 12:46:53 +0100, Peter Able wrote:

snip

Or, if it needs to be smaller than an 807 and you can find it, a 5B/254M

I have a few of both types if anyone needs some :-)

__
Gregg