Home |
Search |
Today's Posts |
#9
![]() |
|||
|
|||
![]()
i3hev, mario held wrote:
Hi Pete, hi all! Pete KE9OA wrote: Thank you Mario.............you are the best! well, well, now... just one among the beAsts... ![]() glad to be of service! I have always wanted to build solid state tube replacements. Now, I am on my way to converting my Collins R-388 to a solid state unit. A good lot of work, I'd say - good luck! ![]() Ciao! I wouldn't mind seeing that article too; in the '80s I built some common type replacements using jfets and bipolars and installed them in an HP scope which was the fastest I had at that time. I still have a real Fetron in my desk drawer. Regards, Michael |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Patrolman Pro-45 (circa 1977) | Equipment | |||
Patrolman Pro-45 (circa 1977) | Homebrew | |||
From the December 1977 issue of S-9 Magazine | CB | |||
FS: "The Beverage Antenna Handbook, 1977 edition | Boatanchors | |||
FS: "The Beverage Antenna Handbook, 1977 edition | Swap |