Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Recommendation for RF Prototype "Vector Board" with groundplane needed
Recommendation for RF Prototype "Vector Board" with groundplane needed
I am looking to prototype a couple of small boards containing LINX TXM-433 LC and LR transmitter modules. These have pads on 0.1" centers and thus will match the Vector board strips that I am familiar with. However for this application, I need a ground plane under the module, and so am looking for a "vector" board with strips, but without plated through holes and ideally a solid ground plane on the reverse side. I would prefer plated traces and fiberglass insulation. These will be simple boards, a TXM-433-LC, a couple of 555 timers and some discrete components. Any recommendations? -- Joe Leikhim K4SAT "The RFI-EMI-GUY"© "Treason doth never prosper: what's the reason? For if it prosper, none dare call it treason." "Follow The Money" ;-P |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
call sign needed for AM "Cash 1700" | Broadcasting | |||
call sign needed for AM "Cash 1700" | Broadcasting | |||
call sign needed for AM "Cash 1700" | Broadcasting | |||
"meltdown in progress"..."is amy fireproof"...The Actions Of A "Man" With Three College Degrees? | Policy |