Home |
Search |
Today's Posts |
#1
|
|||
|
|||
MAking PC board using Silkscreen
Yes, many years ago we made downconverters for the 70cm band, we made
hundreds of boards with silkscreen method. 73 ray (Don Winn) wrote in message . com... A group of local ham would like to make some simple boards that have large traces and pads. Traces are 100mils wide and pads are 150mils. It's a single sided board. It will be cheaper to go with a silkscreen over the photo etch method? Can anyone recommend a screen kit that would work for this project. The boards are 12 inches long and 3-4 inches wide. Pre-sensitized copper clad board is very expensive.We need to make 12-15 boards. DOn AF4Z |
#2
|
|||
|
|||
Yes, many years ago we made downconverters for the 70cm band, we made
hundreds of boards with silkscreen method. 73 ray (Don Winn) wrote in message . com... A group of local ham would like to make some simple boards that have large traces and pads. Traces are 100mils wide and pads are 150mils. It's a single sided board. It will be cheaper to go with a silkscreen over the photo etch method? Can anyone recommend a screen kit that would work for this project. The boards are 12 inches long and 3-4 inches wide. Pre-sensitized copper clad board is very expensive.We need to make 12-15 boards. DOn AF4Z |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WANTED: Uniden Scanner BC002 CTCSS Tone Board | Equipment | |||
FA: Crystal calibrator circuit board w/crystal on Ebay | Boatanchors | |||
WTB VOX board GT550 | Boatanchors | |||
WTB VOX board GT550 | Equipment | |||
WTB VOX board GT550 | Equipment |