Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old July 31st 03, 01:01 AM
Joel
 
Posts: n/a
Default Remote Control signals over coax.

I have a DSS receiver that I run into a modulator and then can use the
Satellite all over the house as if it was cable. The problem is we need to
extend the IR from the remote control. We are now using some RF units from
RCA and while they worked well for a few years, over time they are drifting
off frequency. It seems to me it would make more sense to build some sort
of 'device' to send the IR signals over the coax and then pull it out at the
receiver end. Anyone have any suggestion or experience with building such an
animal?

Joel AG4QC



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
The "TRICK" to TV 'type' Coax Cable [Shielded] SWL Loop Antennas {RHF} RHF Antenna 27 November 3rd 04 01:38 PM
Control signals for Kenwood remote antenna tuner? Dave Platt Equipment 0 March 21st 04 06:44 AM
Control signals for Kenwood remote antenna tuner? Dave Platt Equipment 0 March 21st 04 06:44 AM
Poor quality low + High TV channels? How much dB in Preamp? lbbs Antenna 16 December 13th 03 03:01 PM
Remote Control signals over coax. Joel Homebrew 8 July 31st 03 11:32 AM


All times are GMT +1. The time now is 10:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017