LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #27   Report Post  
Old September 25th 03, 05:40 AM
Paul Keinanen
 
Posts: n/a
Default

On 24 Sep 2003 22:04:07 GMT, (Avery Fineman)
wrote:


The effect should not be there with or without diodes, with or without
any resistors...unless there is some VERY big RF source out of the
receiver's tuning range that is supplying energy to the diodes and
thus causing the "mixer" effect.


It should also be noted that when several quite strong out of band
signals are present at the antenna, say ten signals, each with S9+60
dB, which is 50 mVrms (71 mVpeak) into 50 ohms and -13 dBm. On
average, these signals produce a combined signal ten times as large at
-3 dB and the rms voltage is about 150 mV. However, from time to time,
the vectors for each individual signal add up, so you have to add the
_voltages_ for that moment, so the maximum theoretical peak amplitude
is 700 mV (10x71 mV), thus, a single silicon diode starts to conduct,
causing all kinds of mixing products.

Using two (or more) 1N4148 type diodes in series instead of a single
diode in the each back to back pair, will prevent any diode conduction
as long as the peak voltage is larger than 1,4 V in either direction.

The maximum number of diodes in series is determined by the amount of
voltage the following stages will tolerate without disintegrating.
Since most likely there will be some selectivity between this diode
clipper and the first amplifier stage, the amplifier stage will never
see voltages as the limiting voltages in normal operation, but the
diodes will still cut out some abnormal peaks e.g. induced by
lightnings.

The diodes should not have any effect on anything but a few millivolts
of any signal arriving on your antenna. A non-conducting diode simply
shows a junction capacitance to the rest of the world. That's a minor
reactive discontinuity to the antenna connection.


Putting multiple diodes in series in the back to back combination also
reduce the capacitances, since the capacitances in each string are in
series.

Paul OH3LWR

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
AR88 Restoration project: Some Questions. joe landy Boatanchors 6 November 26th 04 03:10 PM
Extra Class License Study Material Drink Antenna 13 February 19th 04 08:29 PM
Road static? John Smith Antenna 19 January 11th 04 03:55 PM
FM Reception Static Problem mBird Antenna 2 October 19th 03 03:41 PM
BEWARE SPENDING TIME ANSWERING QUESTIONS HERE (WAS Electronic Questions) CW Antenna 1 September 5th 03 06:20 PM


All times are GMT +1. The time now is 11:51 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017