Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old January 18th 04, 11:58 AM
Randy Chavis
 
Posts: n/a
Default

the fuel pump will run for a few seconds when you turn the key on and then stop
because it builds up pressure in the line. when you turn the engine over the
pump will start up again to keep the pressure up for all the injectors.it will
never stop till you shut the car off . it has a return presure valve in the
line to return fuel to the tank...bet it is the pump giving you the noise..

randy

ARS: WB4UNA
Randy Chavis
247 Goff Court
West Columbia
S.C. 29172

  #2   Report Post  
Old January 24th 04, 11:54 AM
Scott
 
Posts: n/a
Default

Well, the truck is going in to Ford this coming week. Needs the CD player
replaced and they will install the filter in the fuel tank at no charge, so
I might as well have it done. Is anybody aware of any other tech service
bulletins for noise? My Ford dealer says if there is a TSB, they will do it
as warranty work at no charge. Sure would like to load up on all the RFI
bulletins while it's still in warranty!

Scott

"Randy Chavis" wrote in message
...
the fuel pump will run for a few seconds when you turn the key on and then

stop
because it builds up pressure in the line. when you turn the engine over

the
pump will start up again to keep the pressure up for all the injectors.it

will
never stop till you shut the car off . it has a return presure valve in

the
line to return fuel to the tank...bet it is the pump giving you the

noise..

randy

ARS: WB4UNA
Randy Chavis
247 Goff Court
West Columbia
S.C. 29172



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ford unfriendly to Hams - help / advice needed. Evan Platt Equipment 51 October 19th 04 05:30 PM
Ford unfriendly to Hams - help / advice needed. Evan Platt Equipment 0 October 17th 04 08:09 PM
signal to noise ratio drops on connecting the antenna Ashhar Farhan Homebrew 6 September 22nd 03 10:54 PM
signal to noise ratio drops on connecting the antenna Ashhar Farhan Homebrew 0 September 18th 03 04:51 PM
Automatic RF noise cancellation and audio noise measurement Dave Shrader Homebrew 35 August 11th 03 01:07 AM


All times are GMT +1. The time now is 04:52 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017