| Home |
| Search |
| Today's Posts |
|
#5
|
|||
|
|||
|
"Keyboard In The Wilderness" wrote in message news:21ANb.23933$zs4.10105@fed1read01...
Lots of kits and projects at URL: http://ac6v.com/kits.htm Here is some info that may be of interest: IMPROVED NEOPHYTE RECEIVER This receiver was featured in the spring 1994 issue of Ham Brew Magazine Designed by Wes Baden, K6EIL This is a nice 40 meter receiver and uses a NE602AN OR NE612AN mixer chip and incorporating an AF pre-amplifier and bandpass audio filter will drive a 2 1/2" to 3" speaker to room level volume. Kit includes etched circuit board and all board mount components included is a very nice 20pf air vairable capactior..double bearing type has built in 8:1 reduction and 1/4" shaft copy if artical included with kit...price of this kit is...$32.95 You can find the site where this is offered by doing a Google search of "Dans Small Parts and Kits." Ten-Tec also has a kit in their T-Kit series that sells for $29.95 and comes with all of the parts to put it on any band from 80 thru 10, and this also has an audio filter that works quite well. The Ten-Tec also has a very fine instruction manual, so that would seem to be a better kit for a kid. Hope this is of some help. 73 de WA2AFD |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| What makes a good receiver?? | Dx | |||
| What makes a good receiver?? | Dx | |||
| Really good receiver for 14MHz | Homebrew | |||
| Rare Books on Electronics and Radio and Commmunications | Equipment | |||
| Rare Books on Electronics and Radio and Commmunications | Equipment | |||