On Sat, 13 Mar 2004 10:00:52 +1000, Tony wrote:

The 5th harmonic should be only 14dB below the fundamental, although it will
drop fairly quickly as the sides of the input square wave deviate from vertical.

Does the 3.44MHz have a 50% duty cycle?

Okay, I've now tweaked the osc. to get as near to 50% as possible.
Alas, still no sign of any 5th present in the multiplier's output.
Here's a shot of the (fundamental) output from the inverters. I can't
see any real problem with why it shouldn't be good for a reasonable
comb of harmonics, but our experts may know better. BTW, settings were
2V/div. and 0.1uS/div.

http://www.burridge8333.fsbusiness.co.uk/trace.gif

This other trace was snapped at the base of the transistor stage that
does the multiplying. All there is (circuitry-wise) between this trace
and the last one is a 330 ohm series resistor and a 47pF cap. I'd have
expected to see some clamping action due to the b/e junction, but the
waveshape seems very odd - but does concur with the Spice simulation.
Is there anything amiss, here? (Setting here is 0.5V/div)

http://www.burridge8333.fsbusiness.co.uk/trace2.gif

Still not a sniff of a fifth! :-(
Currently building Reg's 17.2Mhz BPF to see if that can expose it.
--

The BBC: Licensed at public expense to spread lies.