| Home |
| Search |
| Today's Posts |
|
#12
|
|||
|
|||
|
"xpyttl" wrote in message ... Would you believe - Radio Shack. They only have three colors, though. Are you sure it is 30 gauge? I seem to remember RS wire as 28 gauge. I still have a full bag of ww wire spools, along with several hundred sockets, I built many a small machine like an cosmac elf with ww. |
|
#13
|
|||
|
|||
|
"xpyttl" wrote in message ... Would you believe - Radio Shack. They only have three colors, though. Are you sure it is 30 gauge? I seem to remember RS wire as 28 gauge. I still have a full bag of ww wire spools, along with several hundred sockets, I built many a small machine like an cosmac elf with ww. |
|
#14
|
|||
|
|||
|
On Wed, 24 Mar 2004 20:03:52 -0600, "john graesser"
wrote: Are you sure it is 30 gauge? 30 gauge is the standard gauge for wire-wrap wire. I've used it a lot for building up one-off circuit boards. This is by soldering, not wire-wrapping. The insulation type does make quite a difference if you solder it. I think Kynar is the one that works well. |
|
#15
|
|||
|
|||
|
On Wed, 24 Mar 2004 20:03:52 -0600, "john graesser"
wrote: Are you sure it is 30 gauge? 30 gauge is the standard gauge for wire-wrap wire. I've used it a lot for building up one-off circuit boards. This is by soldering, not wire-wrapping. The insulation type does make quite a difference if you solder it. I think Kynar is the one that works well. |
|
#16
|
|||
|
|||
|
RS calls it "wrapping wire" Part No 278-501 is for the Red Color
http://www.radioshack.com/product.as...t%5Fid=278-501 Brokebob wrote: One color is fine with me. The two local stores claim that it is not available anymore. (broke=not working, retired=not working, retired=broke) |
|
#17
|
|||
|
|||
|
RS calls it "wrapping wire" Part No 278-501 is for the Red Color
http://www.radioshack.com/product.as...t%5Fid=278-501 Brokebob wrote: One color is fine with me. The two local stores claim that it is not available anymore. (broke=not working, retired=not working, retired=broke) |
| Reply |
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Single ground | Antenna | |||
| Stainless steel antenna wire | Antenna | |||
| Adding lengths to bare wire antenna? | Antenna | |||
| ton of wire to apply at 90 Mhz | Antenna | |||
| randon wire newbie question | Antenna | |||