Home |
Search |
Today's Posts |
#12
![]() |
|||
|
|||
![]() "xpyttl" wrote in message ... Would you believe - Radio Shack. They only have three colors, though. Are you sure it is 30 gauge? I seem to remember RS wire as 28 gauge. I still have a full bag of ww wire spools, along with several hundred sockets, I built many a small machine like an cosmac elf with ww. |
#13
![]() |
|||
|
|||
![]() "xpyttl" wrote in message ... Would you believe - Radio Shack. They only have three colors, though. Are you sure it is 30 gauge? I seem to remember RS wire as 28 gauge. I still have a full bag of ww wire spools, along with several hundred sockets, I built many a small machine like an cosmac elf with ww. |
#14
![]() |
|||
|
|||
![]()
On Wed, 24 Mar 2004 20:03:52 -0600, "john graesser"
wrote: Are you sure it is 30 gauge? 30 gauge is the standard gauge for wire-wrap wire. I've used it a lot for building up one-off circuit boards. This is by soldering, not wire-wrapping. The insulation type does make quite a difference if you solder it. I think Kynar is the one that works well. |
#15
![]() |
|||
|
|||
![]()
On Wed, 24 Mar 2004 20:03:52 -0600, "john graesser"
wrote: Are you sure it is 30 gauge? 30 gauge is the standard gauge for wire-wrap wire. I've used it a lot for building up one-off circuit boards. This is by soldering, not wire-wrapping. The insulation type does make quite a difference if you solder it. I think Kynar is the one that works well. |
#16
![]() |
|||
|
|||
![]()
RS calls it "wrapping wire" Part No 278-501 is for the Red Color
http://www.radioshack.com/product.as...t%5Fid=278-501 Brokebob wrote: One color is fine with me. The two local stores claim that it is not available anymore. (broke=not working, retired=not working, retired=broke) |
#17
![]() |
|||
|
|||
![]()
RS calls it "wrapping wire" Part No 278-501 is for the Red Color
http://www.radioshack.com/product.as...t%5Fid=278-501 Brokebob wrote: One color is fine with me. The two local stores claim that it is not available anymore. (broke=not working, retired=not working, retired=broke) |
Reply |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Single ground | Antenna | |||
Stainless steel antenna wire | Antenna | |||
Adding lengths to bare wire antenna? | Antenna | |||
ton of wire to apply at 90 Mhz | Antenna | |||
randon wire newbie question | Antenna |