Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old April 17th 04, 12:49 PM
Tom
 
Posts: n/a
Default Need replacement CRT for Tek 492 Spectrum Analyser

The title says it all . Need a replacement tube for a 492 as the existing
one is breaking down. So fails after 30 minutes of use.


  #2   Report Post  
Old April 19th 04, 08:02 AM
John Miles
 
Posts: n/a
Default

In article , "Tom"
m3cbzATmapctDOTcom says...
The title says it all . Need a replacement tube for a 492 as the existing
one is breaking down. So fails after 30 minutes of use.


Tom Neumann at http://www.tektrotom.de/web/intro.html usually has these
available. You can email him at info (at) tektrotom.de .

Tom's a good guy to work with, in my experience -- he has lots of Tek
490-series parts at reasonable prices.

Other possible sources: http://www.sphere.bc.ca/ , and Deane Kidd
).

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------
  #3   Report Post  
Old April 19th 04, 08:02 AM
John Miles
 
Posts: n/a
Default

In article , "Tom"
m3cbzATmapctDOTcom says...
The title says it all . Need a replacement tube for a 492 as the existing
one is breaking down. So fails after 30 minutes of use.


Tom Neumann at http://www.tektrotom.de/web/intro.html usually has these
available. You can email him at info (at) tektrotom.de .

Tom's a good guy to work with, in my experience -- he has lots of Tek
490-series parts at reasonable prices.

Other possible sources: http://www.sphere.bc.ca/ , and Deane Kidd
).

-- jm

------------------------------------------------------
http://www.qsl.net/ke5fx
Note: My E-mail address has been altered to avoid spam
------------------------------------------------------
  #4   Report Post  
Old April 19th 04, 10:42 AM
Highland Ham
 
Posts: n/a
Default

The title says it all . Need a replacement tube for a 492 as the
existing
one is breaking down. So fails after 30 minutes of use.

===================================
Are you sure it is the CRT and not the power supply to it ; is the HV OK ?

Frank GM0CSZ / KN6WH


  #5   Report Post  
Old April 19th 04, 10:42 AM
Highland Ham
 
Posts: n/a
Default

The title says it all . Need a replacement tube for a 492 as the
existing
one is breaking down. So fails after 30 minutes of use.

===================================
Are you sure it is the CRT and not the power supply to it ; is the HV OK ?

Frank GM0CSZ / KN6WH




  #6   Report Post  
Old April 19th 04, 05:59 PM
Rv!
 
Posts: n/a
Default

FYI.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=3810870866


  #7   Report Post  
Old April 19th 04, 05:59 PM
Rv!
 
Posts: n/a
Default

FYI.
http://cgi.ebay.co.uk/ws/eBayISAPI.d...tem=3810870866


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Direct conversion spectrum analyser Ashhar Farhan Homebrew 30 October 17th 03 08:00 AM
Spectrum Analyser CRT drive problem Hans Summers Homebrew 6 August 18th 03 07:01 PM


All times are GMT +1. The time now is 04:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017