Home |
Search |
Today's Posts |
#7
![]() |
|||
|
|||
![]()
Hi Ken,
I have built a lot of crystal ladder filters over the years using methods and tools provided by W. Hayward W7ZOI, J. Makhinson N6NWP and others. Some filters are simple while others can be considered as high performance ones. Among the several papers dealing with the subject, I strongly suggest you read the following : - A Unified Approach to the Design of Crystal Ladder Filters, W. Hayward, QST May 1982, pp 21-27 - Designing an Building High-performance Crystal Ladder Filters, J. Makhinson, QEX January 1995, pp 24-29 - Designing and Building Simple Crystal Filters, W. Hayward, QST July 1987, pp 24-28 You can also have a look at my Web site : roland.cordesses.free.fr where some designs are presented with their measured characteristics. 73's Roland F2DC ============================================== Ken Scharf wrote in message ... I have about a half dozen 3.333mhz and 5.0688 crystals. Each group is with in 100hz of the same frequency when put into a simple oscillator. I also have a few 11.0592 crystals that are almost as close (probably should get a few more of these). The 5.0688 and 11.0592 are in HC49/U cans, the 3.333 are in a somewhat larger sized can. Wonder if any of these groups would make a good ladder filter for a receiver IF strip? I would guess the 3.333 ones would be better for CW, the 11.0592 for ssb, and the 5.0688 might be a compromise either way? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
ladder line construction methods? | Antenna | |||
ladder line recommendations? | Antenna | |||
Ladder line question ???? | Antenna | |||
Ladder Line question please? | Boatanchors | |||
Ladder Line or Coax For Reception only? | Antenna |