Hello to all

Just downloaded and am playing with psk31 software. I can receive ok as I have
a cable for that( standard plug to plug). I would like to transmit but do not
have the cable. Looking to homebrew something simple until I can afford the
Rascal GLX. I mean something real simple like just some wires plugged to the
appropriate pins on my mic jack. I have an IC 718. I just don't know which
pins to go to. I'm thinking I want to trigger the vox . . . That just sounds
like the easiest way. I do have some homebrew experience as I built a 20meter
rockmite into an altoids can. . . and it works. Minimal, but I am fairly new
to this. Licensed under a year.

Thanks for any suggestions
73
Greg

Just downloaded and am playing with psk31 software. I can receive ok as I
have
a cable for that( standard plug to plug). I would like to transmit but do
not
have the cable. Looking to homebrew something simple until I can afford
the
Rascal GLX. I mean something real simple like just some wires plugged to
the
appropriate pins on my mic jack. I have an IC 718. I just don't know
which
pins to go to. I'm thinking I want to trigger the vox . . . That just
sounds
like the easiest way. I do have some homebrew experience as I built a
20meter
rockmite into an altoids can. . . and it works. Minimal, but I am fairly
new
to this. Licensed under a year.
---------------------------------------------------
Although a galvanic hook-up is considered OK by many , galvanically
separated connections between soundcard and transceiver for RX , TX aswell
as PTT are recommended.
It can be simply done by means of 2 small audio type of transformers a few
resistors and trimpots ,usually from a junk box ,ex transistor radio or
modem ,with the PTT through an opto-coupler.
If you are interested I can send you a scanned image of a simple circuit
diagramme ,which I implemented myself and is working well .

Frank GM0CSZ / KN6WH
gm0csz(dot)kn6wh(at)ntlworld(dot)com

Just downloaded and am playing with psk31 software. I can receive ok as I
have
a cable for that( standard plug to plug). I would like to transmit but do
not
have the cable. Looking to homebrew something simple until I can afford
the
Rascal GLX. I mean something real simple like just some wires plugged to
the
appropriate pins on my mic jack. I have an IC 718. I just don't know
which
pins to go to. I'm thinking I want to trigger the vox . . . That just
sounds
like the easiest way. I do have some homebrew experience as I built a
20meter
rockmite into an altoids can. . . and it works. Minimal, but I am fairly
new
to this. Licensed under a year.
---------------------------------------------------
Although a galvanic hook-up is considered OK by many , galvanically
separated connections between soundcard and transceiver for RX , TX aswell
as PTT are recommended.
It can be simply done by means of 2 small audio type of transformers a few
resistors and trimpots ,usually from a junk box ,ex transistor radio or
modem ,with the PTT through an opto-coupler.
If you are interested I can send you a scanned image of a simple circuit
diagramme ,which I implemented myself and is working well .

Frank GM0CSZ / KN6WH
gm0csz(dot)kn6wh(at)ntlworld(dot)com

Hello Greg and al.

http://perso.wanadoo.fr/f6crp/denis/psk31.htm

is in french but there are useful shematics.

73 de F8BOE Olivier ...-.-



"Greg Doughty" a écrit dans le message de
...
Hello to all

Just downloaded and am playing with psk31 software. I can receive ok as I
have
a cable for that( standard plug to plug). I would like to transmit but do
not
have the cable. Looking to homebrew something simple until I can afford
the
Rascal GLX. I mean something real simple like just some wires plugged to
the
appropriate pins on my mic jack. I have an IC 718. I just don't know
which
pins to go to. I'm thinking I want to trigger the vox . . . That just
sounds
like the easiest way. I do have some homebrew experience as I built a
20meter
rockmite into an altoids can. . . and it works. Minimal, but I am fairly
new
to this. Licensed under a year.

Thanks for any suggestions
73
Greg

Hello Greg and al.

http://perso.wanadoo.fr/f6crp/denis/psk31.htm

is in french but there are useful shematics.

73 de F8BOE Olivier ...-.-



"Greg Doughty" a écrit dans le message de
...
Hello to all

Just downloaded and am playing with psk31 software. I can receive ok as I
have
a cable for that( standard plug to plug). I would like to transmit but do
not
have the cable. Looking to homebrew something simple until I can afford
the
Rascal GLX. I mean something real simple like just some wires plugged to
the
appropriate pins on my mic jack. I have an IC 718. I just don't know
which
pins to go to. I'm thinking I want to trigger the vox . . . That just
sounds
like the easiest way. I do have some homebrew experience as I built a
20meter
rockmite into an altoids can. . . and it works. Minimal, but I am fairly
new
to this. Licensed under a year.

Thanks for any suggestions
73
Greg