| Home |
| Search |
| Today's Posts |
|
|
|
#1
May 6th 04, 06:56 PM
|
|||
|
|||
THanks, very interesting. I wonder if anyone's tried paralleling up
half a dozen of 'em for more power? ================================== Mind in-&output capacitances ,which add-on when parallelling. Frank GM0CSZ / KN6WH |
|
#2
May 6th 04, 07:05 PM
|
|||
|
|||
|
Highland Ham wrote:
THanks, very interesting. I wonder if anyone's tried paralleling up half a dozen of 'em for more power? ================================== Mind in-&output capacitances ,which add-on when parallelling. Frank GM0CSZ / KN6WH Not to mention that "critical layout". -- Tim Wescott Wescott Design Services http://www.wescottdesign.com |
|
#3
May 6th 04, 10:34 PM
|
|||
|
|||
|
On Thu, 6 May 2004 17:56:06 +0100, "Highland Ham"
wrote: THanks, very interesting. I wonder if anyone's tried paralleling up half a dozen of 'em for more power? ================================== Mind in-&output capacitances ,which add-on when parallelling. Indeed, but there must be some current-pumping circuit that might assist here? -- The BBC: licenced at public expense to spread lies. |
|
#4
May 21st 04, 07:41 AM
|
|||
|
|||
|
I've successfully used a complementary-symmetry driver for an MRF510 at
20 and 15 meters, class C, 5 watts out. The driver is essentially digital, being driven to the rails. Roy Lewallen, W7EL Paul Burridge wrote: Indeed, but there must be some current-pumping circuit that might assist here? |
|
#5
May 21st 04, 07:41 AM
|
|||
|
|||
|
I've successfully used a complementary-symmetry driver for an MRF510 at
20 and 15 meters, class C, 5 watts out. The driver is essentially digital, being driven to the rails. Roy Lewallen, W7EL Paul Burridge wrote: Indeed, but there must be some current-pumping circuit that might assist here? |
|
#6
May 6th 04, 07:05 PM
|
|||
|
|||
|
Highland Ham wrote:
THanks, very interesting. I wonder if anyone's tried paralleling up half a dozen of 'em for more power? ================================== Mind in-&output capacitances ,which add-on when parallelling. Frank GM0CSZ / KN6WH Not to mention that "critical layout". -- Tim Wescott Wescott Design Services http://www.wescottdesign.com |
|
#7
May 6th 04, 10:34 PM
|
|||
|
|||
|
On Thu, 6 May 2004 17:56:06 +0100, "Highland Ham"
wrote: THanks, very interesting. I wonder if anyone's tried paralleling up half a dozen of 'em for more power? ================================== Mind in-&output capacitances ,which add-on when parallelling. Indeed, but there must be some current-pumping circuit that might assist here? -- The BBC: licenced at public expense to spread lies. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FA: JRL-2000F 1KW SOLID STATE HF LINEAR AMPLIFIER | Equipment | |||
| RF amps: tuned load in Class A? | Homebrew | |||
| Derivation of the Reflection Coefficient? | Antenna | |||
Hybrid Mode
