Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #71   Report Post  
Old November 19th 17, 08:36 PM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Jan 2014
Posts: 329
Default Morse Key Contacts?

Roger Hayter wrote:
Stephen Thomas Cole wrote:

Roger Hayter wrote:
Stephen Thomas Cole wrote:



Gents, can you please **** off.

If you have nothing to contribute to the discussion why join in at all?


One minute it's ok to have a joke on Usenet, the next it isn't. Make up
your mind, Rog! Your inconsistency is making you look vindictive, OM.


"Gents,can you please **** off" is just too subtle a joke for me, I
didn't get it at first. Now you point it out it is uproariously funny.
I don't know how I could have missed that!


I find it troubling that, despite having such a monumentally defective
humour gland, you've unilaterally declared yourself the final arbiter on
what jokes are funny enough to pass moderation. You couldn't make it up!

--
STC / M0TEY /
http://twitter.com/ukradioamateur
  #72   Report Post  
Old November 19th 17, 11:46 PM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Nov 2012
Posts: 989
Default Morse Key Contacts?

Roger Hayter wrote on 11/19/2017 4:45 AM:
rickman wrote:

snip

I have seen no reasonable explanation of how a reed switch is any more
analog than a mechanical switch. They are both analog movements of a
mechanism. The only difference is one adjusts a magnetic field while the
other applies pressure to a spring which bends (again in an analog manner)
until it begins to make contact with another spring. Which will have more
jitter? Only a measurement will say and the reed switch has a much lower
time of bouncing, so will not possibly have a noticeable jitter in time of
actuation.


I agree that jitter is not a major issue, but I do think that with a
mechanical switch that human muscles and brain are directly part of the
analogue feedback loop controlling jitter in a way they may not be with
an intervening magnetic link. At least with a straight key, if springs
are part ot the system then your argument is more convincing. This is a
different issue from contact bounce, which occurs after the initial
contact closure.


Can you explain how the two differ? Just saying they are different isn't an
explanation.

Of course any key has to have a spring for returning the key to home
position. Every key I've seen had at least two adjustments, home position
(and therefore the travel to contact closure) and spring tension.

Bounce time is still and issue because most debounce circuits use a simple
RC to resolve the bounce time and this adds delay to the contact closure
time as seen by the equipment.

--

Rick C

Viewed the eclipse at Wintercrest Farms,
on the centerline of totality since 1998
  #73   Report Post  
Old November 20th 17, 12:27 AM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Jan 2015
Posts: 185
Default Morse Key Contacts?

rickman wrote:

Roger Hayter wrote on 11/19/2017 4:45 AM:
rickman wrote:

snip

I have seen no reasonable explanation of how a reed switch is any more
analog than a mechanical switch. They are both analog movements of a
mechanism. The only difference is one adjusts a magnetic field while the
other applies pressure to a spring which bends (again in an analog manner)
until it begins to make contact with another spring. Which will have more
jitter? Only a measurement will say and the reed switch has a much lower
time of bouncing, so will not possibly have a noticeable jitter in time of
actuation.


I agree that jitter is not a major issue, but I do think that with a
mechanical switch that human muscles and brain are directly part of the
analogue feedback loop controlling jitter in a way they may not be with
an intervening magnetic link. At least with a straight key, if springs
are part ot the system then your argument is more convincing. This is a
different issue from contact bounce, which occurs after the initial
contact closure.


Can you explain how the two differ? Just saying they are different isn't an
explanation.


A straight key is a simple proportional muscle movement with feedback
loop via the feel of the contact closure. A key that works via a spring
has a phase change to to the effective energy storage (inductance
analogue) of the spring. The brain is very good at correcting very
slight innacuracies if there is such simple motor feedback circuit,
musicians do it all the time. If there is a magnetic movement or an
optical circuit then a complex delay is included which is no longer a
very simple function of muscular position, Unless the magnetic reaction
of the reed switch is very reproducible or the optical link is very
fast. The human brain can probably have its otherwise very accurate
judgement of cadence harmed by a very few milliseconds of non-linearity.
I do agree it should be possible to arrange such circuits so they are
too fast to notice, but they would have to be very fast.





Of course any key has to have a spring for returning the key to home
position. Every key I've seen had at least two adjustments, home position
(and therefore the travel to contact closure) and spring tension.


The spring in a straight key varies the force but this is linear with
displacement and not out of phase as it is with a springy linkage.



Bounce time is still and issue because most debounce circuits use a simple
RC to resolve the bounce time and this adds delay to the contact closure
time as seen by the equipment.



Most debouncing circuits nowadays would be implemented by digital
device ignoring input for a certain time rather than a simple RC
circuit. Probably a microprocessor.


--

Roger Hayter
  #74   Report Post  
Old November 20th 17, 12:50 AM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Oct 2012
Posts: 1,067
Default Morse Key Contacts?

On 11/19/2017 12:55 PM, Stephen Thomas Cole wrote:
Jerry Stuckle wrote:
On 11/19/2017 12:35 AM, Stephen Thomas Cole wrote:


Reported to ISP for off-topic posting.


ROFLMAO! As if you ever posted anything on topic! Stuff it, Cole.


Reported to ISP for personal abuse.


Yes, you should report yourself for personal abuse, Cole!

--
==================
Remove the "x" from my email address
Jerry, AI0K

==================
  #75   Report Post  
Old November 20th 17, 12:50 AM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Oct 2012
Posts: 1,067
Default Morse Key Contacts?

On 11/19/2017 12:55 PM, Stephen Thomas Cole wrote:
Jerry Stuckle wrote:
On 11/19/2017 12:35 AM, Stephen Thomas Cole wrote:


Reported to ISP for off-topic posting.


ROFLMAO! As if you ever posted anything on topic! Stuff it, Cole.


Reported to ISP for personal abuse.


Reported to ISP for off-topic posting.

--
==================
Remove the "x" from my email address
Jerry, AI0K

==================


  #76   Report Post  
Old November 21st 17, 04:26 AM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Nov 2012
Posts: 989
Default Morse Key Contacts?

Roger Hayter wrote on 11/19/2017 6:27 PM:
rickman wrote:

Roger Hayter wrote on 11/19/2017 4:45 AM:
rickman wrote:

snip

I have seen no reasonable explanation of how a reed switch is any more
analog than a mechanical switch. They are both analog movements of a
mechanism. The only difference is one adjusts a magnetic field while the
other applies pressure to a spring which bends (again in an analog manner)
until it begins to make contact with another spring. Which will have more
jitter? Only a measurement will say and the reed switch has a much lower
time of bouncing, so will not possibly have a noticeable jitter in time of
actuation.

I agree that jitter is not a major issue, but I do think that with a
mechanical switch that human muscles and brain are directly part of the
analogue feedback loop controlling jitter in a way they may not be with
an intervening magnetic link. At least with a straight key, if springs
are part ot the system then your argument is more convincing. This is a
different issue from contact bounce, which occurs after the initial
contact closure.


Can you explain how the two differ? Just saying they are different isn't an
explanation.


A straight key is a simple proportional muscle movement with feedback
loop via the feel of the contact closure. A key that works via a spring
has a phase change to to the effective energy storage (inductance
analogue) of the spring. The brain is very good at correcting very
slight innacuracies if there is such simple motor feedback circuit,
musicians do it all the time. If there is a magnetic movement or an
optical circuit then a complex delay is included which is no longer a
very simple function of muscular position, Unless the magnetic reaction
of the reed switch is very reproducible or the optical link is very
fast. The human brain can probably have its otherwise very accurate
judgement of cadence harmed by a very few milliseconds of non-linearity.
I do agree it should be possible to arrange such circuits so they are
too fast to notice, but they would have to be very fast.


I have no idea what you are talking about with a "complex delay". The reed
switch is a switch just like any other. The mechanical switch has contacts
just like the reed switch. Trying to invoke the human body and nervous
system doesn't explain the difference in the switches you are picturing.

Why wouldn't the optical and reed switches be fast? I've seen optocouplers
that are good for 10 MHz data rates. The reed switches I've seen are rated
for multiple kHz operation. What would make you think either of these are
too slow to provide the contact closure for a mechanical device???

How do you define "very fast"??? Everything I've seen that was mechanical
in nature is *much* slower than electronic devices.


Of course any key has to have a spring for returning the key to home
position. Every key I've seen had at least two adjustments, home position
(and therefore the travel to contact closure) and spring tension.


The spring in a straight key varies the force but this is linear with
displacement and not out of phase as it is with a springy linkage.


Where is a "springy linkage"??? You must be picturing something very
different from what I am picturing.


Bounce time is still and issue because most debounce circuits use a simple
RC to resolve the bounce time and this adds delay to the contact closure
time as seen by the equipment.



Most debouncing circuits nowadays would be implemented by digital
device ignoring input for a certain time rather than a simple RC
circuit. Probably a microprocessor.


Debounce circuits are implemented by the people designing them. Who inserts
a digital device between the key and the radio? Where have you seen such
circuits for a code key? When I searched for such circuits for use with CW
everything I found was RC delays.

--

Rick C

Viewed the eclipse at Wintercrest Farms,
on the centerline of totality since 1998
  #77   Report Post  
Old September 15th 18, 12:43 PM posted to uk.radio.amateur,rec.radio.amateur.homebrew
external usenet poster
 
First recorded activity by RadioBanter: Nov 2017
Posts: 5
Default Morse Key Contacts?

On Mon, 21 Dec 2015 23:33:17 +0000, gareth wrote:

For those who make their own Morse Keys, what do you use for the
contacts, for I have found the phosphor bronze pillar for the dot
contact on my ersatz Vibroplex to be very noisy and scratchy?

I'm fairly sure that I asked this question before, but it has been a
habit of never put off till tomorrow what you can put off till the day
after.

I chose phosphor bronze because in the days of making one's own
electronic organs, phosphor bronze was suggested as a suitable keying
matreial for the keyboards.



I hope you get an answer, Gareth, because you wouldn't believe how common
this question is.



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coastal Morse Stations Return to Air for Anniversary of Death of Morse Code David Shortwave 0 July 12th 06 01:39 PM
Computer-Read Morse (Was Morse Code Binary?) Len Anderson Policy 1 February 7th 05 08:18 AM
FA: $9.99 MICROCRAFT "MORSE-A-WORD" MORSE CODE READER-NR RLucch2098 Swap 0 June 15th 04 02:44 PM
FA: $9.99 MICROCRAFT "MORSE-A-WORD" MORSE CODE READER-NR RLucch2098 Equipment 0 June 15th 04 02:44 PM
FA: $9.99 MICROCRAFT "MORSE-A-WORD" MORSE CODE READER-NR RLucch2098 Equipment 0 June 15th 04 02:44 PM


All times are GMT +1. The time now is 12:21 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017