Power Pole Connectors
 

Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in Waterlooville,
Hants.

Ordered enough yesterday, and prompt delivery today!

Well done that firm! (No connection with them (apart from the Power Poles
:-) ) )

Power Pole Connectors
 

"gareth" wrote:
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in Waterlooville,
Hants.

Ordered enough yesterday, and prompt delivery today!

Well done that firm! (No connection with them (apart from the Power Poles
:-) ) )

Did they come with a manual? If so, are all pages present?

--
STC // M0TEY // twitter.com/ukradioamateur

Power Pole Connectors
 

"gareth" wrote in message
...
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in Waterlooville,
Hants.

Ordered enough yesterday, and prompt delivery today!

Well done that firm! (No connection with them (apart from the Power Poles
:-) ) )


For a good number of years a friend and I used some 2 pin Molex type plugs
for the 12 volt power so they would all interchange. They were not rated for
the current of the later devices and started to be difficult to find.

We have now switched over to the power poles like some of the rest of the
country. There is a recommended way to pair them up as sort of a 'standard'
so people in different parts of the country can swap out the gear if wanted.

While there are several varities of them, they make some that use the same
plastic housing and the contacts are different only in the size of wire
they are made for. I think it is the 15, 30,45 amp ones that are that way.

I hope you spent afew more dollars and bought the crimping tool for them.
Makes instlling them well worth the $ 20 or for the tool.

Power Pole Connectors
 

On 16/01/16 15:51, Ralph Mowery wrote:



For a good number of years a friend and I used some 2 pin Molex type plugs
for the 12 volt power so they would all interchange. They were not rated for
the current of the later devices and started to be difficult to find.

We have now switched over to the power poles like some of the rest of the
country. There is a recommended way to pair them up as sort of a 'standard'
so people in different parts of the country can swap out the gear if wanted.

While there are several varities of them, they make some that use the same
plastic housing and the contacts are different only in the size of wire
they are made for. I think it is the 15, 30,45 amp ones that are that way.

I hope you spent afew more dollars and bought the crimping tool for them.
Makes instlling them well worth the $ 20 or for the tool.



I generally solder mine but I should really invest in a crimp tool, it
is far less fiddly.

It is also worth investing in some of the accessories- eg the PVC
'boots' and panel mount holders, plus the pins to 'lock' blocks of
connectors together if you are making your own multi-way connectors.

The plastic clips to hold a 'back to back' pair together are also
useful, especially if there is any risk of the connectors being pulled
apart.

You can also get bushes to allow finer wire to be used in the larger
connectors.

The groove on the body of the shell can by used to lock the connector in
a plastic or metal box, at the top edge. Handy for homebrewing. I use a
small plastic box and fit a resetable fuse inside to convert the various
handheld leads to powerpower.



--
Why you should not ignore animal neglect and cruelty:
http://www.caar-uk.org/why.html

Power Pole Connectors
 

"Ralph Mowery" wrote in message
...
"gareth" wrote in message
...
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in Waterlooville,
Hants.
Ordered enough yesterday, and prompt delivery today!
Well done that firm! (No connection with them (apart from the Power
Poles

For a good number of years a friend and I used some 2 pin Molex type plugs
for the 12 volt power so they would all interchange. They were not rated
for the current of the later devices and started to be difficult to find.

We have now switched over to the power poles like some of the rest of the
country. There is a recommended way to pair them up as sort of a
'standard' so people in different parts of the country can swap out the
gear if wanted.

While there are several varities of them, they make some that use the same
plastic housing and the contacts are different only in the size of wire
they are made for. I think it is the 15, 30,45 amp ones that are that
way.

I hope you spent afew more dollars and bought the crimping tool for them.
Makes instlling them well worth the $ 20 or for the tool.


No, couldn't find the accompanying advert for the crimpers so will probably
solder the connections
unless I can find a man who has the crimpers already. That is, unless I
fashion
a crimping block in my metal working workshop; how big is the hole for
the 30 Amp pins when the crimper is closed?

Power Pole Connectors
 

"gareth" wrote in message
...
"Ralph Mowery" wrote in message
...
"gareth" wrote in message
...
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in
Waterlooville, Hants.
Ordered enough yesterday, and prompt delivery today!
Well done that firm! (No connection with them (apart from the Power
Poles
For a good number of years a friend and I used some 2 pin Molex type
plugs for the 12 volt power so they would all interchange. They were not
rated for the current of the later devices and started to be difficult
to find.
We have now switched over to the power poles like some of the rest of the
country. There is a recommended way to pair them up as sort of a
'standard' so people in different parts of the country can swap out the
gear if wanted.
While there are several varities of them, they make some that use the
same plastic housing and the contacts are different only in the size of
wire they are made for. I think it is the 15, 30,45 amp ones that are
that way.
I hope you spent afew more dollars and bought the crimping tool for them.
Makes instlling them well worth the $ 20 or for the tool.
No, couldn't find the accompanying advert for the crimpers so will
probably solder the connections
unless I can find a man who has the crimpers already. That is, unless I
fashion
a crimping block in my metal working workshop; how big is the hole for
the 30 Amp pins when the crimper is closed?


No worries for the person who introduced me to Power Poles in practice, a
model
engineer for whom I was diagnosing a lock-up in the motor controller of his
5" gauge Class 45
diesel will lend me his crimper.

Power Pole Connectors
 

In article ,
"gareth" wrote:

"Ralph Mowery" wrote in message
...
"gareth" wrote in message
...
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in Waterlooville,
Hants.
Ordered enough yesterday, and prompt delivery today!
Well done that firm! (No connection with them (apart from the Power
Poles

For a good number of years a friend and I used some 2 pin Molex type plugs
for the 12 volt power so they would all interchange. They were not rated
for the current of the later devices and started to be difficult to find.

We have now switched over to the power poles like some of the rest of the
country. There is a recommended way to pair them up as sort of a
'standard' so people in different parts of the country can swap out the
gear if wanted.

While there are several varities of them, they make some that use the same
plastic housing and the contacts are different only in the size of wire
they are made for. I think it is the 15, 30,45 amp ones that are that
way.

I hope you spent afew more dollars and bought the crimping tool for them.
Makes instlling them well worth the $ 20 or for the tool.


No, couldn't find the accompanying advert for the crimpers so will probably
solder the connections
unless I can find a man who has the crimpers already. That is, unless I
fashion
a crimping block in my metal working workshop; how big is the hole for
the 30 Amp pins when the crimper is closed?

I also used the Molex 2-pin connectors for many years. It may have been
a Heathkit or an Icom FM radio that got me started. Then the local ARES
guys came up with a "standard" that was backwards from what I had! As
far as I can tell, the PowerPole standard is fairly universal.

I believe the 45 Amp terminals are open barrel, and the 30 Amp terminals
are cylindrical barrel. Before the expensive open barrel crimp tool was
introduced, they recommended a common Gardner-Bender tool that put a
deep dimple in the back of the 30 Amp barrel. You could open the barrel
slightly and use it with 10 AWG stranded wire.

Do not use tension pins to lock connector housings together. There is a
high probability they will come out, and could short-circuit any
electronic equipment they fall into. Instead, use super glue to join
them. Some are sold already glued together.

Other than tension pins falling out, the only other problem I've had was
when the terminal did not "click" when inserted into its housing.

Fred
K4DII

Power Pole Connectors
 

"gareth" wrote in message
...
"gareth" wrote in message
...
"Ralph Mowery" wrote in message
...
"gareth" wrote in message
...
Decided to Power Pole all the 12V gear here (Why I ever decided to put
a detachable 12V lead via an octal plug/socket combination on my HB
QRP 80M rig is beyond me!) and discovered Torberry down in
Waterlooville, Hants.
Ordered enough yesterday, and prompt delivery today!
Well done that firm! (No connection with them (apart from the Power
Poles
For a good number of years a friend and I used some 2 pin Molex type
plugs for the 12 volt power so they would all interchange. They were not
rated for the current of the later devices and started to be difficult
to find.
We have now switched over to the power poles like some of the rest of
the country. There is a recommended way to pair them up as sort of a
'standard' so people in different parts of the country can swap out the
gear if wanted.
While there are several varities of them, they make some that use the
same plastic housing and the contacts are different only in the size of
wire they are made for. I think it is the 15, 30,45 amp ones that are
that way.
I hope you spent afew more dollars and bought the crimping tool for
them. Makes instlling them well worth the $ 20 or for the tool.
No, couldn't find the accompanying advert for the crimpers so will
probably solder the connections
unless I can find a man who has the crimpers already. That is, unless I
fashion
a crimping block in my metal working workshop; how big is the hole for
the 30 Amp pins when the crimper is closed?
No worries for the person who introduced me to Power Poles in practice, a
model
engineer for whom I was diagnosing a lock-up in the motor controller of
his 5" gauge Class 45
diesel will lend me his crimper.

Borrowed it this morning, only to find that it's not an Anderson crimper
but a Draper one. Still, here goes ...

Power Pole Connectors
 

"gareth" wrote in message
...


A little disappointed as I had thought that the black and red ones wouldn't
interlink, but
this is only true of they're paired together as in the demo ...

http://www.g0hwc.com/anderson-powerpole.html

Power Pole Connectors
 

On 17/01/2016 14:39, gareth wrote:
"gareth" wrote in message
...


A little disappointed as I had thought that the black and red ones wouldn't
interlink, but
this is only true of they're paired together as in the demo ...

http://www.g0hwc.com/anderson-powerpole.html



ha ha suckered.....

--
Cheat your way through life, join the Freemasons
DIGITAL just doesn't work properly most of the time
Hammy Mens are not Radio Amateurs