| Home |
| Search |
| Today's Posts |
|
#6
May 11th 04, 10:53 PM
|
|||
|
|||
On Tue, 11 May 2004 11:16:12 -0400, "Tim" wrote:
I'm sure this is in the handbook, but darned if I can find it. I'm using a MAR-6 after a DDS and filtered output for a little gain into a passive mixer, the DDS will be used for 1-30 MHz or so, how do I calculate the value of the RF choke at the DC supply side? I hope this question is at least coherent... Tim ka8ddz Read their appnote on biasing mmic amps... http://www.minicircuits.com/appnote/an60010.pdf Remove "HeadFromButt", before replying by email. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New Program - Coaxial Choke | Antenna | |||
| New program - Coax Choke | Boatanchors | |||
| New program - Coax Choke | Equipment | |||
| New program - Coax Choke | Equipment | |||
| New program - Coax Choke | Equipment | |||
Threaded Mode
