Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old September 4th 04, 12:14 AM
Tim Wescott
 
Posts: n/a
Default

Jim Thompson wrote:


Circuit Specialists is a good outfit... been around for a long time
(33 years), and they're in my neighborhood (Mesa, AZ), about 20
minutes away.

About the only place in the Phoenix area to buy **real** parts.

...Jim Thompson


Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
  #2   Report Post  
Old September 4th 04, 01:31 AM
Jim Thompson
 
Posts: n/a
Default

On Fri, 03 Sep 2004 16:14:22 -0700, Tim Wescott
wrote:

Jim Thompson wrote:


Circuit Specialists is a good outfit... been around for a long time
(33 years), and they're in my neighborhood (Mesa, AZ), about 20
minutes away.

About the only place in the Phoenix area to buy **real** parts.

...Jim Thompson


Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.


When I lived in the Boston area Radio Shack was a real parts warehouse
(on Commonwealth Avenue) with a will-call counter (only 45 years ago
;-)

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.
  #3   Report Post  
Old September 4th 04, 01:58 AM
Tim Wescott
 
Posts: n/a
Default

Jim Thompson wrote:

On Fri, 03 Sep 2004 16:14:22 -0700, Tim Wescott
wrote:


Jim Thompson wrote:


Circuit Specialists is a good outfit... been around for a long time
(33 years), and they're in my neighborhood (Mesa, AZ), about 20
minutes away.

About the only place in the Phoenix area to buy **real** parts.

...Jim Thompson


Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.



When I lived in the Boston area Radio Shack was a real parts warehouse
(on Commonwealth Avenue) with a will-call counter (only 45 years ago
;-)

...Jim Thompson


That was probably before they got bought by Tandy.

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
  #4   Report Post  
Old September 4th 04, 04:34 AM
Harry Dellamano
 
Posts: n/a
Default


"Tim Wescott" wrote in message
...

Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.



When I lived in the Boston area Radio Shack was a real parts warehouse
(on Commonwealth Avenue) with a will-call counter (only 45 years ago
;-)

...Jim Thompson


That was probably before they got bought by Tandy.

--

Tim Wescott


When I lived in the Boston area, I would drive by Radio Shack on the way to
Scully Square and the real good parts.
Cheers,
Harry

  #5   Report Post  
Old September 4th 04, 04:46 PM
Jim Thompson
 
Posts: n/a
Default

On Sat, 04 Sep 2004 03:34:01 GMT, "Harry Dellamano"
wrote:


"Tim Wescott" wrote in message
...

Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.


When I lived in the Boston area Radio Shack was a real parts warehouse
(on Commonwealth Avenue) with a will-call counter (only 45 years ago
;-)

...Jim Thompson


That was probably before they got bought by Tandy.

--

Tim Wescott


When I lived in the Boston area, I would drive by Radio Shack on the way to
Scully Square and the real good parts.
Cheers,
Harry


And the Old Howard Casino ?:-)

...Jim Thompson
--
| James E.Thompson, P.E. | mens |
| Analog Innovations, Inc. | et |
| Analog/Mixed-Signal ASIC's and Discrete Systems | manus |
| Phoenix, Arizona Voice480)460-2350 | |
| E-mail Address at Website Fax480)460-2142 | Brass Rat |
| http://www.analog-innovations.com | 1962 |

I love to cook with wine. Sometimes I even put it in the food.


  #6   Report Post  
Old September 9th 04, 05:53 PM
Gary S.
 
Posts: n/a
Default

On Sat, 04 Sep 2004 03:34:01 GMT, "Harry Dellamano"
wrote:

"Tim Wescott" wrote in message
...

Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.


When I lived in the Boston area Radio Shack was a real parts warehouse
(on Commonwealth Avenue) with a will-call counter (only 45 years ago
;-)

...Jim Thompson


That was probably before they got bought by Tandy.

Tim Wescott


When I lived in the Boston area, I would drive by Radio Shack on the way to
Scully Square and the real good parts.
Cheers,
Harry


Scollay Square was a little before my time.

Of historical note, the Sears Crescent Building there, still standing,
was where A G Bell and Watson worked on inventing the telephone.

Greater Boston still has You-Blew-It Electronics in Needham. (Actually
You-Do-It). A few other suppliers, but not like when this was a center
of manufacturing.

Happy trails,
Gary (net.yogi.bear)
------------------------------------------------
at the 51st percentile of ursine intelligence

Gary D. Schwartz, Needham, MA, USA
Please reply to: garyDOTschwartzATpoboxDOTcom
  #7   Report Post  
Old September 4th 04, 05:43 AM
Leon Heller
 
Posts: n/a
Default

"Jim Thompson" wrote in message
...
On Fri, 03 Sep 2004 16:14:22 -0700, Tim Wescott
wrote:

Jim Thompson wrote:


Circuit Specialists is a good outfit... been around for a long time
(33 years), and they're in my neighborhood (Mesa, AZ), about 20
minutes away.

About the only place in the Phoenix area to buy **real** parts.

...Jim Thompson


Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.


When I lived in the Boston area Radio Shack was a real parts warehouse
(on Commonwealth Avenue) with a will-call counter (only 45 years ago


Here in the UK virtually all the local component outlets have disappeared.
However, there are plenty of mail order suppliers and one can get most items
the next day.

Leon


  #8   Report Post  
Old September 4th 04, 11:59 AM
Highland Ham
 
Posts: n/a
Default

Here in the UK virtually all the local component outlets have disappeared.
However, there are plenty of mail order suppliers and one can get most

items
the next day.

==============================
Indeed ,considering all the States side parts stories , in the UK we are
most fortunate in having a number of small, often '0ne or persons '
companies supplying ( by 'next day' mail ) a large variety of common and
sometimes not so common parts at very reasonable prices.
Because of their limited turnover they are not forced to levy Value Added
Tax (VAT) = purchase tax.

I am a happy customer (only) of the following 2 , but there are many others
:

www.modecomponents.co.uk

www.jabdog.com

Frank GM0CSZ / KN6WH


  #9   Report Post  
Old September 4th 04, 11:44 PM
Tim Wescott
 
Posts: n/a
Default

Leon Heller wrote:


Here in the UK virtually all the local component outlets have disappeared.
However, there are plenty of mail order suppliers and one can get most items
the next day.

Leon


It's rare here to be able to waltz down to someplace local and get real
components, unless you're lucky enough to happen to be by a big store.

And Fry's don't count for parts (although they still have decent test
equipment for sale).

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com
  #10   Report Post  
Old September 4th 04, 02:10 AM
Spehro Pefhany
 
Posts: n/a
Default

On Fri, 03 Sep 2004 16:14:22 -0700, the renowned Tim Wescott
wrote:

Jim Thompson wrote:


Circuit Specialists is a good outfit... been around for a long time
(33 years), and they're in my neighborhood (Mesa, AZ), about 20
minutes away.

About the only place in the Phoenix area to buy **real** parts.

...Jim Thompson


Lucky you. PDX has a Fry's and a little local outfit, but that doesn't
count for real parts. I used to live in the Boston area, 30 minutes
away from an Active store -- that was nice, particularly since it backed
up against Future (same company) & you could get non-catalog items at
the counter if you really needed them.


I think Active has been spun off now.

Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How does this "cold heat" soldering iron work? scroob Homebrew 12 August 21st 04 12:47 AM
FA: Good cheap Toshiba laptop for Packet, logging, etc. GS Boatanchors 1 December 2nd 03 05:22 PM
Rare Books on Electronics and Radio and Commmunications Hania Lux Equipment 0 October 22nd 03 07:48 PM
Rare Books on Electronics and Radio and Commmunications Hania Lux Equipment 0 October 22nd 03 07:48 PM
How do I make a cheap but good pirate radio antenna 'Doc Antenna 14 August 1st 03 03:19 AM


All times are GMT +1. The time now is 09:10 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017