On 30 Oct 2004 05:57:31 -0700, (chafik
CN8JV) wrote:

wrote in message ...
Symptom: Radio won't power up.
Probable Cause: Burned ground circuit trace in flex cable.
Cu Replace flex cable EP2 at main board.

(http://www.icomamerica.com/support/

Sorry
my english is verybad
so I dont know what is a flex cable?

I don't know anything about this radio, but flex is short for flexible
(bendable, can be bent). Typically these cables are thin plastic sheets
with printed circuit traces on them rather than wires.

If the cable has a burnt trace, you may be able to see it with your
eyes.