| Home |
| Search |
| Today's Posts |
|
#4
November 17th 04, 01:16 AM
|
|||
|
|||
Al wrote:
In article , Ken Scharf wrote: Al wrote: I recently picked up a used Miller vernier panel dial assembly, P/N 10035. It is about 6.5 by 7.75 inches. It has five scales on it labeled A,B,C,D and E as well as a 0-100 scale at the bottom. It takes a little over 6 turns of the knob to move the slider from 0 to 100. If you're interested, send email to . I can then send you some jpgs showing its condition. You can have it for the cost of shipping and the price is whatever it's worth to you. Al Would that be the slide rule string dial, or the cog belt varity? Dunn, haven't taken it apart and can't tell by looking though the holes. Al The cog belt type is identified by the square tubing that the cog belt rides in. Other kind is totally internal. Cog belt kind of drive is a little rare, a Millen experiment if you will. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wanted: Heath VF-1 front panel and dial | Boatanchors | |||
| Wanted: Heath VF-1 front panel and dial | Equipment | |||
| [WTB] National Velvet Vernier Dial | Equipment | |||
| [WTB] National Velvet Vernier Dial | Equipment | |||
| TS440S front panel and tuning dial removal | Equipment | |||
Threaded Mode
