......is that we club together and conceive of a design
for an HF transceiver that could form the basis of the
station of any budding Radio Ham.

We wouldn't need any facilities other than were present in,
say, the KW2000 of 35 years ago (apart from greater than
200 kHz coverage on each band!)

None of the CBer's facilities such as scanners, memories,
CAT interfaces, CTCSS and the like are necessary.

I suggest that we consider a DSP approach for all the
baseband mod and demod, and then phasing techniques
for translating into the various bands.

A power output of 5W will be more than sufficient for
any self-respecting _REAL_ Radio Hams - it is only
CBers and CBers-Masquerading-As-Radio-Hams who
need to work with BBC levels of signal strength.

Such a project could be what we need to capture the
interest of newcomers who would not then be sidetracked
into the CB-like purchasing of brand-new rigs from the
shelves of emporia, and, having, constructed their own
rigs, would feel competent to maintain those rigs, unlike
those who send them back to the emporia and thus show
themselves as closet CBers.

We _COULD_ take a lead in this NG!