Menu

wire that heat strips insulation

Page 2 of 2

2

Search this Thread

#11

Report Post

Old

August 21st 18, 04:08 PM posted to rec.radio.amateur.homebrew

Ralph Mowery Ralph Mowery is offline

Ralph Mowery is offline

external usenet poster

First recorded activity by RadioBanter: Jul 2006

Posts: 702

Default

wire that heat strips insulation

In article ,
says...

I worked for a transformer company decades ago and they used wire that
stripped & tinned in a solder pot. Standard transformer wire for that
company at the time, as it saved time in production. Have a word
with your local transformer company or stockist...

Chris

Most of that wire needs around 400 deg C of heat to melt the insulation
for soldering. Way too much for circuit board work.
I bought some wire off ebay that was listed as solderable insulation.
Found out after I tried it that it required 390 deg C to melt the
insulation from the wire web page.

They list that type of wire as something like 155 deg C wire, but found
out that is the rated working temperature, not the soldering
temperature.

Reply With Quote

Reply With Quote

#12

Report Post

Old

August 21st 18, 05:41 PM posted to rec.radio.amateur.homebrew

Ralph Mowery Ralph Mowery is offline

Ralph Mowery is offline

external usenet poster

First recorded activity by RadioBanter: Jul 2006

Posts: 702

Default

wire that heat strips insulation

In article ,
says...

But it varies between makes of wire. With the real "enamelled" wire
this doesn't work.

I may have used the 'enamelled' type wire, but yes, the real insulation
of that type it will not 'strip' with solder.

There are many types of insulation that look like or similar to
enammelled wire, but are very different.

Reply With Quote

Reply With Quote

Page 2 of 2

2

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
FS: AMP insulation displacement wire taps - Lots of 10	Oz In DFW	Swap	2	February 16th 09 02:03 AM
Boring Modern Electronics and Bacon Strips	€ Dr. Artaud €	Shortwave	8	May 1st 05 08:06 AM
FS: Terminal Strips	Jim Monroe	Swap	0	January 2nd 05 12:02 AM
-WANTED- Wire Measurer -or- Wire Meter -or- Wire counter	Bill Hansen	Swap	0	August 22nd 04 12:47 AM
WANTED:: Wire Measurer -or- Wire Meter -or- Wire Counter .	Bill Hansen	General	0	August 22nd 04 12:45 AM

All times are GMT +1. The time now is 03:25 PM.

About Us

"It's about Radio"

Contact Us RadioBanter forum home Privacy Statement

Copyright © 2017