LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Old October 29th 20, 05:02 AM posted to rec.radio.amateur.moderated,rec.radio.amateur.homebrew,uk.radio.amateur,free.uk.amateur-radio
external usenet poster
 
First recorded activity by RadioBanter: Jun 2018
Posts: 28
Default [M0NWK] RECEIVE ADS-B USING SDRPLAY / DUMP1090 / VIRTUAL RADAR SERVER


M0NWK

///////////////////////////////////////////
RECEIVE ADS-B USING SDRPLAY / DUMP1090 / VIRTUAL RADAR SERVER

Posted: 28 Oct 2020 04:35 PM PDT
http://www.m0nwk.co.uk/receive-ads-b...-radar-server/


This blog shows hardware, software and configuration that enables me
toÂ*receive and decode ADS-B transmissions from aircraft and plot them on a
map.

Click on the continue button to see more.




This is still work in progress and I have more details and photos to come,
but here are all of the steps required to start receiving ADS-B using
SDRplay RSP receiver and dump1090 and Virtual Radar Server.
Software installation & configuration
Step 1: API/HW Driver 3.07

I navigated to:

https://www.sdrplay.com/downloads/

And downloaded: API/HW Driver 3.07

I then installed the software on my PC using default settings.
Step 2: ADS-B dump1090

From the same site https://www.sdrplay.com/downloads/ IÂ*downloaded: ADS-B
(dump1090) 1.47

Then installed the software on my PC using default settings.
Step 3: Virtual Radar Server

I navigated to:

http://www.virtualradarserver.co.uk/Download.aspx

And downloaded: Version 2.4.4

I then installed the software on my PC using default settings.

Step 4: Virtual Radar Server configuration

Open Virtual Radar Software application.

Click on Tools Options



Change / check configuration:

Format = AVR or Beast Raw Feed
Address = 127.0.0.1
Port = 30005



Hardware
Step 5: RSP connection

Attach your RSP to your computer.
Step 6: ADS-B antenna

Connect suitable antenna to your RSP.
Receive & decode ADS-B
Step 7: Start dump1090

Go to SDRplay folder / menu and click on:

Start dump1090 in* where * = mode

If antenna is good and software configuration correct you should start
receiving ADS-B transmissions from aircraft.



Step 8: Start Virtual Radar Software

Open Virtual Radar Server application.

Messages received in dump1090 will now be displayed in the Feed status



Step 9: Virtual Radar Server map

Click on http://127.0.0.1/VirtualRadar



The Virtual Radar Server map will now open and display aircraft.




 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[M0NWK] J-Pole antenna calculator M0NWK via rec.radio.amateur.moderated Admin Antenna 1 October 25th 20 04:08 PM
[M0NWK] OLED Display for Minitiouner V2 M0NWK via rec.radio.amateur.moderated Admin Homebrew 0 March 15th 19 04:49 AM
FA: 2 Professional Books: RADAR TECHNOLOGY - RADAR - RADAR - RADAR - RADAR - RADAR Pat Antenna 0 November 7th 05 01:21 AM
FA: 2 Professional Books: RADAR TECHNOLOGY - RADAR - RADAR - RADAR - RADAR - RADAR Pat Equipment 0 November 7th 05 01:21 AM


All times are GMT +1. The time now is 09:23 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017