Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old January 19th 05, 07:01 PM
 
Posts: n/a
Default

Henry Kolesnik wrote:
As of this moment it has run over 26 hours without shutting down.

I've
never seen any evidence that ESR can be an intermittent phenomena.

Can
someone please tell me how intermittent ESR comes about?



The measured ESR of an electrolytic capacitor changes with
temperature.... usually ESR decreases slightly. If the power supply
circuit is just at the threshold of operating correctly then very
slight changes in the ESR of critical capacitors will certainly affect
how the power supply operates and sometimes it can cause a catastrophic
failure of other components. Cold or cracked solder connections can
also cause similar intermittent symptoms.
The repair suggestion replies you have been getting to your original
posting are your FIRST troubleshooting and testing steps; otherwise we
are all guessing here.

  #12   Report Post  
Old January 19th 05, 07:03 PM
Lou
 
Posts: n/a
Default


wrote in message
ups.com...
Henry Kolesnik wrote:
As of this moment it has run over 26 hours without shutting down.

I've
never seen any evidence that ESR can be an intermittent phenomena.

Can
someone please tell me how intermittent ESR comes about?



The measured ESR of an electrolytic capacitor changes with
temperature.... usually ESR decreases slightly. If the power supply
circuit is just at the threshold of operating correctly then very
slight changes in the ESR of critical capacitors will certainly affect
how the power supply operates and sometimes it can cause a catastrophic
failure of other components. Cold or cracked solder connections can
also cause similar intermittent symptoms.
The repair suggestion replies you have been getting to your original
posting are your FIRST troubleshooting and testing steps; otherwise we
are all guessing here.


Just a guess here, as I may have missed a post or two, but does the unit
shut down "completely" to where nothing can be traced through to see where
it stops? IF not, maybe try that too. I agree with the rest otherwise.

L.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Homebrew 2 August 14th 20 06:12 PM
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Equipment 2 June 16th 06 04:22 PM
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Equipment 0 August 7th 03 06:16 PM
fs: Kenwood kpt50 repeater radio programmer Skipp has Kenwood stuff Homebrew 0 August 7th 03 06:16 PM
Address the issues, Skippy! Repost #3 Skipp would rather be back in Tahoe CB 5 July 30th 03 07:05 PM


All times are GMT +1. The time now is 05:52 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017