Win wrote:

On Wed, 30 Mar 2005 16:48:23 GMT, "Michael A. Terrell"
wrote:



Win wrote:


I recently purchased an old crank-up motor driven 60 foot tower that I
would hope someone could id for me. The motor belt drives a gearbox,
which turns the cable pulley. It has a approximately 1 foot by 18
inch control box which has two high current relays and two glass
contained relays. The glass-contained relays are in old 8 pin tube
sockets.

The tower, itself, is in good shape. I would like to re-build the
control circuits and out the tower in service. Any information anyone
can give me on this tower will be greatly appreciated. See at
www.winlyn.us/tower.jpg.

Win, w0lz



Glass relay? Are you talking about Apmerite time delay relays?


Yes, Michael. I think I am talking about time delay relays.

Win


I think he is referring to clear plastic cased relays.

Bill K7NOM

"Bill Janssen" wrote in message ...
Win wrote:
On Wed, 30 Mar 2005 16:48:23 GMT, "Michael A. Terrell"
wrote:

Win wrote:
I recently purchased an old crank-up motor driven 60 foot tower that I
would hope someone could id for me. The motor belt drives a gearbox,
which turns the cable pulley. It has a approximately 1 foot by 18
inch control box which has two high current relays and two glass
contained relays. The glass-contained relays are in old 8 pin tube
sockets.

The tower, itself, is in good shape. I would like to re-build the
control circuits and out the tower in service. Any information anyone
can give me on this tower will be greatly appreciated. See at
www.winlyn.us/tower.jpg.

Win, w0lz

Glass relay? Are you talking about Apmerite time delay relays?
Yes, Michael. I think I am talking about time delay relays.

Win
I think he is referring to clear plastic cased relays.

Bill K7NOM


Then those would most likely be P&B KARP series relays. Clear plastic cover, octal base plug base, DPDT, in a variety of coil voltages.
Lynn, W7LTQ