LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #11   Report Post  
Old May 10th 05, 02:22 AM
Roy Lewallen
 
Posts: n/a
Default

I'm eagerly awaiting the block diagram and system specification which I
assume you'll be working on. I'm sure it won't take you long. Good luck!

Roy Lewallen, W7EL

John Smith wrote:
Roy:



Like Linux, a superior operating system when compared to windows--it would
mainly be done by "the community"... all the hardware guys would have to do
is make known the ports, address, etc... they are really un-needed from
there--but, it would speed the takeoff of the "system" if they did provide a
beginning point... and, one can always run a de-compressor (if they have
compressed the executable), then a disassembler to asm, then a converter to
"C" and, if you can program, you can now "tweak" the code anyway you would
like... you will have a copy of it!!!!



If the "hardware guys" didn't know how to provide a software interface,
there are "linux hams" who would, most likely, if asked, "sponsor" such a
effort on the Linux platform--hopefully--the interface to such a radio would
bypass BOTH Mac and Windows, why these OS's are sufficient for home users,
non-technical business and gov't--the technical mind deserves more, the
power of linux (unix really) would serve them much better...



However, the "system" we are speaking of would ONLY require a software
interface if you inserted that card/module which allowed computer control,
otherwise it would be using the analog card/module and associated
faceplate...



I think most here start right out trying to "limit" this "system" I have put
forward--there would be no limits to it... if you can see a limit, that is
only a bug which needs designed around...



The homebrew community might be the best place to design, develop and
introduce this from... as, if you allow too greedy a manufacturer
control--it will just end up dying from his/her attempts to squeeze too much
blood from the turnip!!! That is what has happened in the past...



Warmest regards,
John

 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Any GE Progress Line Units Still Around? Jim Knoll Boatanchors 3 November 13th 08 09:15 PM
Amateur Radio Newsline(tm) Report 1394 - April 30, 2004 Radionews Shortwave 0 April 30th 04 05:50 PM
Amateur Radio Newsline(tm) Report 1394 - April 30, 2004 Radionews Policy 0 April 30th 04 05:48 PM
Amateur Radio Newsline(tm) Report 1394 - April 30, 2004 Radionews General 0 April 30th 04 05:47 PM
Why do hams always stand in the way of progress? SouthDakotaRadio Scanner 12 March 14th 04 02:06 AM


All times are GMT +1. The time now is 06:06 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017