About Us

June 26th 05, 12:26 AM

wrote:
I am looking for a nice schematic, and perhaps additional info, on a 12V
(fil. & plate) tube superhet Rx; just something fairly simple for CW/SSB
reception without bells and whistles, and preferably for 75M/40M reception.

Can anyone point me to info on this? Thanks.

Operating tube plates down to 12 VDC supply is pushing things a
bit far, to be honest with you.

Setchell-Carlson managed to do it with loctal-base tubes running
off of a 24/28 VDC aircraft bus back in WW2 times. No dynamotor,
just that cute little box referred to as a "range receiver" or
BC-1206.

I bought a couple of them many years ago, surplus, principally
to get the nice compact 3-gang variable capacitor. Fired one
up in the company lab at 26 VDC and it was still in-spec although
those specs weren't the best. At 24 VDC the spec rating was
marginal. At 22 VDC it was below spec...but then the filaments
were also running cooler at 11 V each.

Don't remember what the IF (135 KHz) BW was, but, running with
a crystal-controlled converter ahead of it, the 195 to 500 KHz
tuning range could cover 75 or 40 meters no problem. A thought.

I've got one of those in the junk box. I was thinking of converting
it to solid state using cascaded (J310-311 and 2N2222) transistors,
perhaps a differential set of J310's for the mixer and a single J310
for the oscillator. Not sure about the audio and detector stages yet.
There was an article in an old '73 magazine on converting one of those
sets to solid state and adding a crystal controled converter to receive
40 meters. I've misplaced that issue though.

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1930's Futuristic Shortwave Wood Radio - Searchlight radio - info wanted	[email protected]	Shortwave	0	January 12th 05 05:56 PM
Needed: Info or manual for Fisher 1800 Tube Receiver	unc80	Swap	1	November 30th 04 06:58 AM
102-E Western Electric Tube info needed	Jim Rayburn	Boatanchors	0	August 20th 03 06:15 PM
102-E Western Electric Tube info needed	Jim Rayburn	Homebrew	0	August 19th 03 12:49 AM
102-E Western Electric Tube info needed	Jim Rayburn	Homebrew	0	August 19th 03 12:49 AM

Menu

About Us