In article , (Dave
Platt) wrote:

- Secure the red and black connectors together after slip-fitting them,
so that they can't come apart and be reconnected incorrectly.
Anderson provides "roll pins" for this purpose, to lock 'em
together, but I've heard some people say that these can vibrate out
of the connectors. I prefer to use a drop of Crazy Glue or acetone
to permanently bond 'em together.

Dave-

Anderson may supply the roll pins if you ask, but they don't come with the
connectors.

I found out about the adoption by various emergency organizations such as
RACES, and converted all of my equipment. I started with a roll pin in
each pair, but soon noticed that over half of the pins had fallen out.
Fortunately there was no damage from pins falling into live electronic
equipment.

Thinking I just had the wrong roll pins, I tried to buy some from an
Anderson dealer. That is where I heard about using Crazy Glue.

I hadn't considered offsetting the connectors so black and red could
connect. Yes, that would be a problem, so don't to that!

Although Anderson Power Poles seem like a good idea, I'm by myself around
here. The local RACES/ARES guys insist on using Molex connectors as their
standard (IC-22A compatible), ignoring that they aren't rated for the
current their modern equipment uses.

73, Fred, K4DII

In article ,

- Secure the red and black connectors together after slip-fitting them,
so that they can't come apart and be reconnected incorrectly.
Anderson provides "roll pins" for this purpose, to lock 'em
together, but I've heard some people say that these can vibrate out
of the connectors. I prefer to use a drop of Crazy Glue or acetone
to permanently bond 'em together.

Dave-

Anderson may supply the roll pins if you ask, but they don't come with the
connectors.

Seems to depend on the distributor, then. One merchant from whom I
bought PowerPoles at Pacificon a couple of years ago included them in
the bag. PowerWerx sells them separately, and I don't bother buying
them.

I found out about the adoption by various emergency organizations such as
RACES, and converted all of my equipment. I started with a roll pin in
each pair, but soon noticed that over half of the pins had fallen out.
Fortunately there was no damage from pins falling into live electronic
equipment.

Other people seem to have had the same experience.

Thinking I just had the wrong roll pins, I tried to buy some from an
Anderson dealer. That is where I heard about using Crazy Glue.

I hadn't considered offsetting the connectors so black and red could
connect. Yes, that would be a problem, so don't to that!

Yup.

Although Anderson Power Poles seem like a good idea, I'm by myself around
here. The local RACES/ARES guys insist on using Molex connectors as their
standard (IC-22A compatible), ignoring that they aren't rated for the
current their modern equipment uses.

Are those the old-style stamped-metal round Molex pins, such as one
finds in a PC power supply cable, or are they using the flat-metal
"OEM T" connector used by a lot of the radio manufacturers these days?
I can't tell from the picture in the IC-22 manual I downloaded.

I really loathe the round-pin Molex - it really doesn't seem like a
design that will either stand up to repeated cyclings, or handle a lot
of current.

--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!

In article , (Dave
Platt) wrote:

Are those the old-style stamped-metal round Molex pins, such as one
finds in a PC power supply cable, or are they using the flat-metal
"OEM T" connector used by a lot of the radio manufacturers these days?
I can't tell from the picture in the IC-22 manual I downloaded.

Dave-

They are the old-style stamped-metal round Molex pins. These may be a
smaller size than the ones used for PC power supplies, so current rating
would be less.

73, Fred, K4DII