LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #2   Report Post  
Old April 5th 06, 05:12 PM posted to rec.radio.amateur.homebrew
Lawrence Statton N1GAK/XE1
 
Posts: n/a
Default 20A 24v to 12v DC voltage dropper

writes:
Hi all,

Just bought this power supply and it turns out to be 24V as opposed to
12 as I'd hoped. It's a heafty beast and should be good for running my
HF mobile if I can drop the voltage down to 13.8 whilst retaining about
20 amps for the rig's TX current draw. I know I can buy a commercial
dropper, but that'd be cheating, so can anyone suggest how I might
acheive such a device through HB-ing? Which active devices would be
best for this purpose? I'd like over-voltage protection built-into any
design put forward if possible. Any pointers, please.


What you're saying is: You want to build a 20A 13.8V power supply with
OVP. That it happens to take 24Vdc instead of 120Vac is trivial.

Your options are -- design a nice switching converter (which based on
the tenor of your question is beyond your mettle at the moment) or
build an enormous linear regulator and dissipate a couple hundred
watts making a very nice place for the cat to nap Best to set that
24V supply on the shelf, hope some day to find a good use for it, and
either buy or build a 13.8V supply from scratch.

Thanks!


--
-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Lawrence Statton -
m s/aba/c/g
Computer software consists of only two components: ones and
zeros, in roughly equal proportions. All that is required is to
sort them into the correct order.
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
'Radio Spares' High Power Voltage Regulator spec ? Highland Ham Homebrew 1 February 13th 06 07:17 PM
SLA charging question. J Shrum Homebrew 7 November 23rd 05 02:49 AM
choke input voltage doubler? Ken Scharf Homebrew 17 November 23rd 05 12:37 AM
FCC: Broadband Power Line Systems Paul Policy 0 January 10th 05 05:41 PM
Building a psu for linear amplifier J M Noeding Homebrew 16 December 1st 03 11:53 PM


All times are GMT +1. The time now is 12:59 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 RadioBanter.
The comments are property of their posters.
 

About Us

"It's about Radio"

 

Copyright © 2017